I have rubbed every knuckle raw so its time to call in help.
I bought a used set of leaf springs from a guy, No Problem.
Removed my old spring from one side and compared making sure of length. I cant for the life of me get the new spring back in place.
Whats the trick?
3 floor jacks and praying hasnt worked so far.
Any detailed help would be soo appreciated.
leaf spring install
Moderators: notoptoy, S Allen, Solex68
-
- Roadster Nut
- Posts: 37
- Joined: Sun Nov 23, 2003 7:07 pm
- Location: Vancouver,Washington
- S Allen
- Site Admin
- Posts: 4572
- Joined: Thu Dec 05, 2002 4:57 pm
- Location: Knoxville, IA(Lake Redrock)Emory, TX
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
RE:Leaf Springs
I always start with mounting the front of the springs first. Then you can use a jack to raise or lower in assisting with the axle and the rear mounts. I have never had a problem yet but your mileage may vary. Make sure you get the rear mounts oriented the correct way unless you prefer that jacked up look!!
Steve

Steve
66 Stroker-Going Orange
67 SRL311-00279-resto project
Stock '72 240Z-Blue
2002 Ford F250 7.3 Diesel 2WD Hauler
2008 Toyota FJ Cruiser
2009 Smart ForTwo Passion Coupe
2013 Fiat 500 Abarth
67 SRL311-00279-resto project
Stock '72 240Z-Blue
2002 Ford F250 7.3 Diesel 2WD Hauler
2008 Toyota FJ Cruiser
2009 Smart ForTwo Passion Coupe
2013 Fiat 500 Abarth