Datsun Roadster Forum-311s.org

well if you get er done , I'd like to see it . good luck

dbrick wrote:Tempered glass will explode into little cubes if stressed or shocked. Biggest thing you need to develop after the glass would be the weatherstrip, very complex piece. If you get that far, Dean may be of help, he has experience making and getting rubber parts made.

Since the tall windshield rubber seals in the wing windows are a FULL seal....I bought a new set to X-acto on for the rotation of the vent glass as it twists 180*. It'll be a good trial fit.
I picked up a set of spare wing windows and frames (68-70) to test some thoughts out on. If tempered glass doesn't respond well to being diamond ground ( for the swivel mount), then things just became much more involved.

Dean, if you are reading this thread....let me know your thoughts on the rubber seal surround design. Even though the color of black might be to wet looking, I was thinking a silicone seal would last more robustly as well as seal wind noise better.

Hello all, Will someone please make these - I need 2 set

Thanks, Charles

Maybe RP975 has some info on what he did! looks great in these pics.
http://www.311s.org/phpBB3/viewtopic.ph ... lit=victor
quite an extensive thread with many great upgrades. I'm always looking through it for ideas!

ACote wrote: ↑Sat Dec 30, 2017 6:50 pm
Maybe RP975 has some info on what he did! looks great in these pics.
http://www.311s.org/phpBB3/viewtopic.ph ... lit=victor
quite an extensive thread with many great upgrades. I'm always looking through it for ideas!

I love the journey of Conekillers car. I was so saddened to hear of his passing recently.

I went back through the whole thread you linked to and didn't see any reference to wing windows or mods to them? Did you see something?