Page 1 of 1
Cylinder Shims
Posted: Mon Jul 18, 2005 6:57 am
by 23yrRebuild
What are the master cylinder shims for?
Posted: Mon Jul 18, 2005 7:50 am
by spl310
Unless I am mistaken, the shims are to adjust the freeplay. You should have the same thickness under both the upper and lower mounts so that the m/c stays in line. Of course, I could be mistaken...
Deleted
Posted: Tue Jul 19, 2005 12:25 pm
by 23yrRebuild
Thanks for the info.
Posted: Tue Jul 19, 2005 2:32 pm
by spl310
Always happy to help! BTW, finding the specs for the free play may be tough. If you need help on that, let me know and I will dig through my books.