Door Glass

General topics.

Moderators: notoptoy, S Allen, Solex68

Post Reply
User avatar
Datrock
Roadsteraholic
Posts: 926
Joined: Fri Feb 14, 2003 1:25 pm
Location: Oregon

Door Glass

Post by Datrock »

I have a set of early doors and the rollup window glass is really thick compared to my late model roadsters. There's no side trim or wings on them.

I don't know if they are 310 or early 311 or are they the same when it comes to doors? I was going to give them to my brother for his 67 1/2 spl.

I also noticed that the interior door latches are not chrome, they look like pot metal or a dull alum. Any input would be appreciated.. Bill
User avatar
S Allen
Site Admin
Posts: 4537
Joined: Thu Dec 05, 2002 4:57 pm
Location: Knoxville, IA(Lake Redrock)Emory, TX
Model: 1500/1600
Year: Low Windshield-64-67.5
Contact:

RE:Doors

Post by S Allen »

Bill,

The dull pot metal sounds like 67.5 as that is what they used on them. Kind of a silver/gray color. I know the 66-67 used chrome. I guess we can go to Ralleye's site to be sure. That is my guess-67.5.

Steve
66 Stroker-Going Orange
67 SRL311-00279-resto project
Stock '72 240Z-Blue
2002 Ford F250 7.3 Diesel 2WD Hauler
2008 Toyota FJ Cruiser
2009 Smart ForTwo Passion Coupe
2013 Fiat 500 Abarth
User avatar
Datrock
Roadsteraholic
Posts: 926
Joined: Fri Feb 14, 2003 1:25 pm
Location: Oregon

Post by Datrock »

Hi Steve, good idea, I looked at Ralley and they have the inside door handle trim that would fit the doors I have. What luck, they are 67 1/2 doors.... Thanks Bill
Post Reply