Fuel Tank Brackets from Datsun Sports
Posted: Fri Jun 17, 2016 1:33 am
The fuel tank in a Datsun Roadster is supported by two straps that have attachment points welded to the trunk floor. Over time the weight of the tank can cause metal fatigue and cracks in the trunk floor. To repair or prevent further damage Mike Young of Datsun Sports developed tank strap brackets to transfer load to the frame.
http://www.datsunsports.com/2016/brackets.php
Cracking usually starts on the passenger side but also occurs on the driver’s side. Shown below are examples of extensive cracking on both sides of the trunk floor (red) and minor cracking on the passenger side only (silver)
On my roadster over the years I noticed the cracks getting worse on the passenger side. I was not aware of cracks occurring on the driver side and sure enough there was evidence of fatigue:
The damage was not serious so to prevent further cracking I installed Mike’s brackets on both sides. The brackets are 100% bolt-on with installation taking minutes. The existing tank straps are used:
It is a simple yet effective part designed to transfer load from the trunk floor to the frame. It is also virtually undetected from outside:
For more information please contact Mike Young at http://www.datsunsports.com