Speedhut Gauges (pics)

[Andy_In_SD]

I prefer flat dashes (always had 67.5 or older before) I am pulling out the decrepit molded dash and replacing it with a flat zebra wood dash. It will have Speedhut Legacy gauges. The gauges are in, they are all made to order. I've selected black lettering on white, at night they are red on black to match the interior.

Speed hut is not cheap (ok, kinda expensive) so I thought I'ld post pics of them in case that helps anyone who is considering them. They are only 1.5 to 2.0 inches deep.

You'll notice no cabling goes to tach or speedo. Speedo uses GPS, tach can use an induction pickup on #1 or a sensor.

[fj20spl311]

Are those 4" or 4.5" gauges?

I have 5" and 2 5/8 gauges auto meter gauges

[Andy_In_SD]

The speed / tach are 4", the rest are 2 1/16"

[JT68]

What's that setup cost made-to-order like you did? Definitely a slick setup for swaps/restomods. jt

[Andy_In_SD]

That was 750 for the set. They had a 20% off sale and I jumped on it. You can check their site out, you can do the customization on their site. If nothing it's fun to play with.

Speed Hut Website

[datsunfreak]

Are those 4" or 4.5" gauges?

They actually offer both, and 3 other sizes. They have 2 1/16, 2 5/8, 3 3/8, 4 and 4 1/2.