Datsun Roadster Forum-311s.org

Hi all,

Dose anyone have a favorite brand of penetrating oil?
I'm going to try to get the old studs out as well as replace the temp sender and I'm expecting them to put up a fight.
It seems this kind of product is an essential tool when working with Roadsters that have been sitting for a while like mine.

Thanks!

PB Blaster and be done with.

+1 on PB Blaster

PB it is then.

I have not been overly impressed by PBblaster, but then I haven't been too impressed with ANY product yet for penetrating/loosening stuck in place parts. Though I DO love Evap-O-Rust if the part is able to be dipped..

PB Blaster has worked for me but watch out as it is highly flammable.

S

Has anyone tried Kroil , a lot of good write ups on it

Kroil has good reviews, but can be tough to locate. Some swear but a mix of ATF and acetone

I use Krill..can get it on ebay.
Works well. Have had good results cleaning touchy electrical connects (temp. sending connection and starter connections) - liberal spray night before, toothbrush scrub next morning, respray and wipe down for good measure.....good connection restored without disassembly.
I use it to hit any connections that begin to look funky....last thing we need is a snapped or stripped nut or bolt head in the middle of a normally 'easy tweak'....ask me how I know.

I always use Kroil

KY

Kroil and AeroKroil

Imho Most are good at what they are designed for. I use a a lot of wd40, liquid wrench, PB blaster and the seafoam penetrating oil.
Your choice.
The PB and seafoam are less evaporative.

I had better luck with Kroil than PB. Can only get it online. If you search for coupons, they usually have a deal:

http://www.kanolabs.com/google/