Page 1 of 1
Brake Switch
Posted: Mon May 23, 2005 1:15 pm
by richmcd1969
My brake lamps stay on. It may be the switch. Does anyone have an opinion on sourcing a new switch if bad?
Rich McDonald
1969 2000
1970 1600
1967.5 1600
Posted: Mon May 23, 2005 1:52 pm
by impinhigh
Most likely it’s the rubber bumper stop has broken down and is not allowing the brake light switch to close. Not sure if the part is available, I use a tiny cork plug and inserted it in the hole replacing the rubber bumper.
Posted: Mon May 23, 2005 2:27 pm
by richmcd1969
Thanks for the tip. I will look into it tonight.
Rich
brake switch
Posted: Mon May 23, 2005 4:23 pm
by toolsnob
it can also be that someone in the past had loosened the switch, make sure it is tight. If you need a new switch I have one here NOS in the nissan box.