Page 1 of 2
Nice Roadster Radiator Hose Clamps+Heater Clamps
Posted: Sun Nov 01, 2015 7:57 am
by JT68
Hi All, Pokerman asked me to help him with this project and here is the result. He was looking for an accurate repro of the roadster radiator clamps. These have the correct fasteners and look terrific.
$25 for 4. Cheap Shipping. Not a Z-car clamp etc.
Heater clamps too! (read on!)
pm with shipping address.
Thank you, Jim
Re: Nice Roadster Radiator Hose Clamps
Posted: Sun Nov 01, 2015 11:29 am
by Alvin
Jim thanks for the continued support/creation for roadster parts!
Re: Nice Roadster Radiator Hose Clamps
Posted: Sun Nov 01, 2015 11:49 am
by notoptoy
These are awesome. I would be interested in heater, and fuel line hoses as well!
Any chance these can be stainless? While not original material, it sure would be a nice product and keep them from getting ugly over time.
Re: Nice Roadster Radiator Hose Clamps
Posted: Sun Nov 01, 2015 12:28 pm
by GeoffM
Looks great Jim!
Re: Nice Roadster Radiator Hose Clamps
Posted: Sun Nov 01, 2015 2:07 pm
by twistin
I'm in for a set including heater hoses.
Re: Nice Roadster Radiator Hose Clamps
Posted: Sun Nov 01, 2015 3:21 pm
by JT68
Cool. Was going with stainless initially, but comes out to be 2.5 x more expensive so wasn't thinking most people would want that. I can do either.
Will go ahead and do the heater line clamps too. Thanks! Jim
Re: Nice Roadster Radiator Hose Clamps
Posted: Sun Nov 01, 2015 4:12 pm
by notoptoy
Judging by what people are getting for the Zinc plated versions, 2.5X for a superior product is not a stretch - I'd pay the $63+ bucks for it, but what about an option? By these for $25 or SS for X amount more?
I'm in for a set in SS, if you want to do it, otherwise I am in for a set of these.
Tom
Re: Nice Roadster Radiator Hose Clamps
Posted: Sun Nov 01, 2015 5:45 pm
by Roman
Alvin wrote:Jim thanks for the continued support/creation for roadster parts!
Plus 1 !
Re: Nice Roadster Radiator Hose Clamps
Posted: Sun Nov 01, 2015 7:07 pm
by cktrap
I'll take a full set,too. I also need a set of the side molding fastners. Pm me the payment info. Shipping zip 75254
Keith
Re: Nice Roadster Radiator Hose Clamps
Posted: Sun Nov 01, 2015 7:54 pm
by JT68
I'll do the heater hose clamps too then. Thank you for the kind words and support! Always appreciated, jt
Re: Nice Roadster Radiator Hose Clamps
Posted: Sun Nov 01, 2015 9:20 pm
by S Allen
You continue to amaze me at what you are reproducing. I would like a complete set of the stainless as well. Thanks.
Steve
Re: Nice Roadster Radiator Hose Clamps
Posted: Sun Nov 01, 2015 9:21 pm
by spriso
Those look fantastic Jim-- well done!
Michael
Re: Nice Roadster Radiator Hose Clamps
Posted: Sat Nov 14, 2015 2:59 pm
by JT68
S Allen wrote:You continue to amaze me at what you are reproducing. I would like a complete set of the stainless as well. Thanks. Steve
Thank you very much Steve and Michael and everyone!
update, Now Have:
Radiator clamps in Stainless. 4/$65 shipped
Radiator clamps in Silver Zinc 4/$25
2L Heater clamps in Silver Zinc (approx 5/8") 6.00 ea.
Currently working on:
R16 Heater clamps in SS (for smaller 1/2" hose) (those are next)
Jim
Re: Nice Roadster Radiator Hose Clamps
Posted: Sat Nov 14, 2015 4:14 pm
by cktrap
Are you going to produce stainless heater hose clamps ? If so I need a complete set for a 2L, heater core and control valve, too. Just let me know. Love the radiator Clamps and side trim fasteners. Keep up the good work!!!!
Thanks again
Keith
Re: Nice Roadster Radiator Hose Clamps
Posted: Sat Nov 14, 2015 6:13 pm
by JT68
Yep, I'll make the SS 2L heater clamps with the SS 1600 heater clamps. Will update when finished. TY!