Interior Powder Coat

fish · Post by **fish** » Thu Apr 09, 2015 4:04 pm

Goodies back from the powder coater--they found a practically perfect match for the stock finish. The powder is AkzoNobel "Mist Gray" wrinkle; has pretty much the same color and wrinkle texture. (See sample vs. stock inside of glove box door for comparison, 2nd pic)

Post by **spl310** » Thu Apr 09, 2015 4:24 pm

Awesome!

Skyman · Post by **Skyman** » Mon Apr 13, 2015 8:16 pm

Looks very nice. It looks a little lighter than the original. Or is it just the light?

fish · Post by **fish** » Mon Apr 13, 2015 8:31 pm

I think it might just be the light. Side by side, it's pretty much dead on. About the only noticeable difference if you're looking really hard is that the new wrinkle texture is ever-so-slightly 'deeper' than stock, but I don't think you'd notice without a stock piece right next to it to compare.

Skyman · Post by **Skyman** » Mon Apr 13, 2015 8:35 pm

Thanks. I will be doing mine in the near future. I may just try this color and texture.

devo · Post by **devo** » Mon Apr 13, 2015 9:32 pm

Fish,
Was this done at Electrostatic Painting and Powdercoating at 8745 Lindell Rd in Las Vegas?
Thanks, Dean

mikeb · Post by **mikeb** » Mon Apr 13, 2015 10:04 pm

That looks really nice! I like it. If I may ask, what did it cost for all of the pieces?

Chucks66 · Post by **Chucks66** » Mon Apr 13, 2015 10:11 pm

Looks great.

fish · Post by **fish** » Tue Apr 14, 2015 4:05 pm

devo wrote:Fish,
Was this done at Electrostatic Painting and Powdercoating at 8745 Lindell Rd in Las Vegas?
Thanks, Dean

Hi Dean--

Yes, those are the guys. We used to use them for all our powdercoat at the shop; dozens of pieces a week in a huge variety of sizes and materials, and they always did a fantastic job. Eddie is the man; very conscientious. We used to call him Fast Eddie due to the turnaround time--same day if you needed it, always done within a week. These pieces took them three days.

fish · Post by **fish** » Tue Apr 14, 2015 4:07 pm

mikeb wrote:That looks really nice! I like it. If I may ask, what did it cost for all of the pieces?

I'm not sure what it was for just the interior parts, as they did a bunch of black for me on other parts at the same time. It was $200 for everything, so I'd guess the interior bits were maybe $120.

Curtis · Post by **Curtis** » Tue Apr 14, 2015 4:57 pm

fish wrote:
mikeb wrote:That looks really nice! I like it. If I may ask, what did it cost for all of the pieces?
I'm not sure what it was for just the interior parts, as they did a bunch of black for me on other parts at the same time. It was $200 for everything, so I'd guess the interior bits were maybe $120.

They cleaned/blasted the parts too?

fish · Post by **fish** » Wed Apr 15, 2015 10:25 pm

Curtis wrote: They cleaned/blasted the parts too?

Yes, I just brought them the stuff as it came off the car. It's entirely possible I'm getting a 'good guy' rate though; we ran probably close to a million dollars worth of work through their shop over the years, so they've been very nice to me.

Curtis · Post by **Curtis** » Thu Apr 16, 2015 12:01 am

fish wrote:
Curtis wrote: They cleaned/blasted the parts too?
Yes, I just brought them the stuff as it came off the car. It's entirely possible I'm getting a 'good guy' rate though; we ran probably close to a million dollars worth of work through their shop over the years, so they've been very nice to me.

Thanks. If it comes out looking like that I'll pay more.

Datsun Roadster Forum-311s.org

Interior Powder Coat

Interior Powder Coat

Re: Interior Powder Coat

Re: Interior Powder Coat

Re: Interior Powder Coat

Re: Interior Powder Coat

Re: Interior Powder Coat

Re: Interior Powder Coat

Re: Interior Powder Coat

Re: Interior Powder Coat

Re: Interior Powder Coat

Re: Interior Powder Coat

Re: Interior Powder Coat

Re: Interior Powder Coat