Good morning to everybody
After wheels, another topic : how to fit the hardtop ?
I remind that i will own (as the car is on its way to France !) a Roadster 1600 from 1969.
The car is delivered with an hardtop that i will have to renew.
But the previous owner told me already that he haven't th parts to install it on the car.
I found nothing about this point on the web.
Only parts like these but i'm not sure that they match :
http://www.ebay.com/itm/Datsun-Fairlady ... a3&vxp=mtr
Can you help me please and tell me what are the brakets i need, and it would be great even if you can send me some pictures in order for me to understand how it works.
Many many thanks
JayD
Hard Top fitting
Moderators: notoptoy, S Allen, Solex68
- spl310
- Roadster Guru
- Posts: 13220
- Joined: Sun Dec 29, 2002 10:38 pm
- Location: In front of this keyboard... in Jacksonville, Florida!
Re: Hard Top fitting
It depends on the hard top. Some use the latches from the soft top, while others had special latches.
"Wow, a Roadster!" Stuart Little
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
- notoptoy
- Vendor-Site Supporter
- Posts: 9677
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: Hard Top fitting
In general, they do all seem designed to use the existing hardware for mounting the softtop on the car side (Windshield latch receiver and tensioners at the door pillar behind the seats) - the top latch side is the big difference as SPL310 points out.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- dbrick
- Roadster Fanatic-Site Supporter
- Posts: 10084
- Joined: Thu Sep 09, 2004 11:05 pm
- Location: Kenilworth, New Jersey
Re: Hard Top fitting
Those parts are for a 67.5 model. Yours has 3 clips of a different type. I would wait until you have it and then see what's needed.
Dave Brisco
Take my advice, I'm not using it"
66 2000 The Bobster
64 1500 in pieces for sale
1980 Fiat X1/9
2009 Volvo C-70
08 Expedition EL, STUPID huge but comfy
1962 Thompson Sea Lancer, possible money pit
- jayd
- Roadster Newby
- Posts: 16
- Joined: Tue Mar 31, 2015 6:46 am
Re: Hard Top fitting
Thanks for your answers
i will wait the car to be delivered in France and send you some pictures of it and hardtop to get your advices.
Jérôme
i will wait the car to be delivered in France and send you some pictures of it and hardtop to get your advices.
Jérôme