Stroked r16 w 1500 crank?
Moderators: notoptoy, S Allen, Solex68
-
notoldnfat
Stroked r16 w 1500 crank?
Anyone ever used a 1500 crank in a 1600? I was just wondering what the 3 bolt main guys are doing....seems to me I recall that the 3 bolt bottom end is still pretty darn tough and there's more oil to go around. Just a thought. Thoughts, ideas?
-
spl310
- Roadster Guru
- Posts: 13241
- Joined: Sun Dec 29, 2002 10:38 pm
- Location: In front of this keyboard... in Jacksonville, Florida!
It has been done and you end up with about an 1800cc stroker. The issue is that the 1500 cranks and rods are getting hard to find...
"Wow, a Roadster!" Stuart Little
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
-
S Allen
- Site Admin
- Posts: 4572
- Joined: Thu Dec 05, 2002 4:57 pm
- Location: Knoxville, IA(Lake Redrock)Emory, TX
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
RE:stroked r16 vs 1500
Original Post "As well as the main and rod bearings too!" I stand corrected as the 5 main bearings will work in a three main motor. 
Steve
Steve