Page 1 of 1

300zx rear brakes

Posted: Thu Apr 07, 2005 5:55 pm
by steve68
i see that the rear rotor will fit many years (from the 82 200sx)NISSAN/DATSUN (26) 1982-1988
200SX (10) 1982-1988
1988 L4-1974cc 2.0L F/I Vin CA20E
1987 L4-1974cc 2.0L F/I Vin CA20E
1986 L4-1809cc 1.8L F/I Turbo Vin CA18ET
1986 L4-1974cc 2.0L F/I Vin CA20E
1985 L4-1809cc 1.8L F/I Turbo Vin CA18ET
1985 L4-1974cc 2.0L F/I Vin CA20E
1984 L4-1809cc 1.8L F/I Turbo Vin CA18ET
1984 L4-1974cc 2.0L F/I Vin CA20E
1983 L4-2187cc 2.2L F/I Vin Z22E
1982 L4-2187cc 2.2L F/I Vin Z22E

200SX (CAN) (1) 1987-1987
1987 L4-1809cc 1.8L F/I Turbo Vin C/CA18ET

280ZX (4) 1982-1983
1983 L6-2753cc 2.8L F/I Vin L28E
1983 L6-2753cc 2.8L F/I Turbo Vin L28ET
1982 L6-2753cc 2.8L F/I Vin L28E
1982 L6-2753cc 2.8L F/I Turbo Vin L28ET

300ZX (6) 1984-1986
1986 V6-2960cc 3.0L F/I Vin VG30E
1986 V6-2960cc 3.0L F/I Turbo Vin VG30ET
1985 V6-2960cc 3.0L F/I Vin VG30E
1985 V6-2960cc 3.0L F/I Turbo Vin VG30ET
1984 V6-2960cc 3.0L F/I Vin VG30E
1984 V6-2960cc 3.0L F/I Turbo Vin VG30ET

MAXIMA (5) 1982-1984
1984 L6-2393cc 2.4L F/I Vin L24E
1983 L6-2393cc 2.4L F/I Vin L24E
1983 L6-2793cc 2.8L Diesel Vin LD28
1982 L6-2393cc 2.4L F/I Vin L24E
1982 L6-2793cc 2.8L Diesel Vin LD28

so if the rotor is the same on these cars..the caliper should work also right?Just trying to find another source of parts

steve

Posted: Thu Apr 07, 2005 6:24 pm
by TR
It would appear that the caliper should mate to the rotor, but the body and mounting may be different...More options that could be investigated...