Page 1 of 1
MSD iginiton wires
Posted: Mon Feb 21, 2005 5:31 pm
by Howard R
Does anyone have experience, good or bad with MSD 8.5 super conducter ignition wires?
Posted: Mon Feb 21, 2005 10:28 pm
by SLOroadster
They cost lots, are easy to cut to size, get a set for a V8 and you can make 4 sets, they come with 2 different types of ends, make one set with one type, the other with the other set. There is enough material to make a second set of wires with the extra that you cut off.
I'm running a set, that with a MSD blaster 2 coil makes a set of points last less than 1000 miles. They look good however.
Will
Posted: Wed Feb 23, 2005 12:56 am
by Howard R
Will, thanks for the info. A question...I'm going to keep the existing coil,will the msd wires affect my points? And how often should I replace the points and plugs? Thanks, Howard
Posted: Wed Feb 23, 2005 1:09 am
by SLOroadster
I'd replace the points when they look bad, the plugs once a year wouldn't hurt, every 2 years if you don't drive the car much. My last set of points died in 1000 miles.
Will
Posted: Mon Feb 28, 2005 12:12 pm
by Howard R
Will, I installed the new wires yesterday, the red wires look very cool with my itg aircleaner. I took your advice and bought the 8 cylinder universal kit. I have the makings of a new set, minus the coil boot. Probably a $2.00 part at Pep Boys. Maybe I can sell them at Solvang.