Page 1 of 1
push rods...
Posted: Mon Sep 30, 2013 8:14 pm
by Aprntce
does anyone here have a new set of push rods or know if they are universal with a more common motor? please and thank you
Re: push rods...
Posted: Mon Sep 30, 2013 8:32 pm
by fj20spl311
Aprntce wrote:does anyone here have a new set of push rods or know if they are universal with a more common motor? please and thank you
You can buy push rod from ISKY Cams........I think you can use most universal sets....You have to cut them to size.
Re: push rods...
Posted: Mon Sep 30, 2013 8:35 pm
by Aprntce
thank you!
Re: push rods...
Posted: Mon Sep 30, 2013 8:37 pm
by spl310
The top ends are cups on the Roadster pushrods. Most universal pushrods have a ball at each end. I have some used ones if you just need some...
Re: push rods...
Posted: Mon Sep 30, 2013 8:49 pm
by fossil
both Rallye and Rising Sun Racing shoe new pushrods on their sites.
Stan
============
Re: push rods...
Posted: Mon Sep 30, 2013 8:51 pm
by Aprntce
i put myn in out of order and one of them is pretty toast so im just looking for some good pretty unworn ones so i can drive it......spl310 how much would you want for your set ?..and ill look into both of the spages thank you
Re: push rods...
Posted: Mon Sep 30, 2013 9:00 pm
by spl310
Good catch Stan. I didn't check assuming that the original poster had.
Re: push rods...
Posted: Mon Sep 30, 2013 10:06 pm
by fj20spl311
fj20spl311 wrote:Aprntce wrote:does anyone here have a new set of push rods or know if they are universal with a more common motor? please and thank you
You can buy push rod from ISKY Cams........I think you can use most universal sets....You have to cut them to size.
I guess I should have said Ball and Cup type universal......
The Isky Cams Number :
D-013 5/16 Intake length 7.687 Exh. Length 7.687
Re: push rods...
Posted: Mon Aug 15, 2022 8:46 pm
by Daryl Smith
Irrelephant