Gas tank restore POR-15

Place to put those little tricks or parts you used during the restoration of your roadster.

Moderators: notoptoy, S Allen, Solex68

Post Reply
User avatar
Solex68
Site Supporter
Posts: 2210
Joined: Fri May 25, 2012 3:30 pm
Location: Laguna Hills, CA
Model: 2000
Year: High Windshield-68-70
Contact:

Gas tank restore POR-15

Post by Solex68 »

So while I was planning my gas tank restoration. I was wondering how I could keep my tank cleansing product in the tank. It was easy to duct tape off the fill hole and the 3 fuel lines. The fuel sender hole was another issue.

As I was at the hardware store...it hit me. Use a toilet stopper. The one picked fit best. The red ones looked like they would not fit as well. The one I chose was easy to trim to size and worked like a champ. I just fit it in for the cleansings but I duct taped over it when I applied the epoxy coating. I removed it after about 30 minutes of sloshing the epoxy coating around.

Don't be discouraged by the epoxy drip on the outside of the tank. That was actually from when I previously used POR-15 in my trunk and it seeped onto the tank from the cracks in my trunk.
Greg

See attached:
You do not have the required permissions to view the files attached to this post.
Greg a.k.a SOLEX68 - http://www.datsunvents.com/
Laguna Hills, CA
68 2000
Always willing to help another Datsun Roadster owner
Pending installs: Stan Stealth Dizzy
Fubar

Re: Gas tank restore POR-15

Post by Fubar »

Great Idea. I did POR-15 as well after cleaning the tank with the POR cleaner and a three foot length of chain swing from a tree. Make sure you clean out the fuel lines with some poker while it's still wet or you'll waste a whole day picking chiping those lines back open ;-0
WOODY
Roadster Fanatic-Site Supporter
Posts: 306
Joined: Sat Jun 19, 2010 11:20 am
Location: New York
Contact:

Re: Gas tank restore POR-15

Post by WOODY »

I used bedliner on mine. It protects it from road debris.... is very strong.
User avatar
Solex68
Site Supporter
Posts: 2210
Joined: Fri May 25, 2012 3:30 pm
Location: Laguna Hills, CA
Model: 2000
Year: High Windshield-68-70
Contact:

Re: Gas tank restore POR-15

Post by Solex68 »

Fubar wrote:Great Idea. I did POR-15 as well after cleaning the tank with the POR cleaner and a three foot length of chain swing from a tree. Make sure you clean out the fuel lines with some poker while it's still wet or you'll waste a whole day picking chiping those lines back open ;-0
I used chain as well. 2ft of large heavy link chain and 2ft of a smaller chain that had small sharper edges. I think that really helped scrape and clean the tank.

BTW. Getting both of the chains out took some work as there is a baffle in the tank which caught both of the chains. I used a hanger and some diligence to get it out. A variety of large and smaller nuts may be a better solution. If you choose to use nuts, count them before and after to make sure they all com out of the tank.

Greg
Greg a.k.a SOLEX68 - http://www.datsunvents.com/
Laguna Hills, CA
68 2000
Always willing to help another Datsun Roadster owner
Pending installs: Stan Stealth Dizzy
User avatar
zippy67roadster
Roadster Fanatic-Site Supporter
Posts: 1406
Joined: Tue Dec 08, 2009 4:43 pm
Location: Cameron, Texas
Model: 1500/1600
Year: Low Windshield-64-67.5
Contact:

Re: Gas tank restore POR-15

Post by zippy67roadster »

I had mine boiled out and used KBS tank sealer.
1967 Datsun SPL311-08935-vintage race car
1967 Datsun SPL311-10123 project
1967 Datsun 411 wagon
67.5 SPL311 Vintage Race car project
64 NL320 Pickup Truck
Brian
http://www.sincitydatsuns.com
https://www.facebook.com/sincitydatsuns
Post Reply