Page 1 of 2
How do you like the Snowflakes on my 67
Posted: Sat Apr 21, 2012 9:15 am
by BBF Roadster
I got these from a 1981 280Z turbo, and put some 195/55/15 on them.
They just fit in the rear.
Looking for lug nuts that will fit them, 7/16-20 thread and larger shank.
Re: How do you like the Snowflakes on my 67
Posted: Sat Apr 21, 2012 12:20 pm
by Garm
20 lug nuts on eBay is $20. Work great.
I like the wheels a LOT.

Re: How do you like the Snowflakes on my 67
Posted: Sat Apr 21, 2012 5:09 pm
by fj20spl311
Garm wrote:20 lug nuts on eBay is $20. Work great.
I like the wheels a LOT.

Sorry Garm, but they take a special larger diameter lug nut.
Might be easier to change to 12 mm studs.
BTW, I do like the look. very classic old school.
Re: How do you like the Snowflakes on my 67
Posted: Sun Apr 22, 2012 10:19 am
by Garm
^ oh you're right. I saw 7/16-20 and was blind to the rest.
Re: How do you like the Snowflakes on my 67
Posted: Wed Apr 25, 2012 12:16 am
by dbrick
fj20spl311 wrote:Garm wrote:20 lug nuts on eBay is $20. Work great.
I like the wheels a LOT.

Sorry Garm, but they take a special larger diameter lug nut.
Might be easier to change to 12 mm studs.
BTW, I do like the look. very classic old school.
There have been discussions on those lugnuts, if you search it will come up, don't know the current solution.
Re: How do you like the Snowflakes on my 67
Posted: Thu Apr 26, 2012 7:49 am
by It's a D-A-T-S-U-N
These should work correctly
http://www.ezaccessory.com/Toyota_Lexus ... /5001t.htm" onclick="window.open(this.href);return false;
Re: How do you like the Snowflakes on my 67
Posted: Thu Apr 26, 2012 7:55 am
by dld
I have a set of the six spoke 280ZX wheels, and found lug nuts at the local O'Reilly store that fit properly. I'm assuming they use the same lug nuts.
Re: How do you like the Snowflakes on my 67
Posted: Thu Apr 26, 2012 8:07 am
by It's a D-A-T-S-U-N
Make sure your lug nut shank diameter is .730"
Most aftermarket lug nuts utilize a smaller diameter shank (.680"?).
Re: How do you like the Snowflakes on my 67
Posted: Mon Apr 30, 2012 1:50 am
by nismou20
They complement the car nicely as they appear to be bigger than they are. They're 15 but stand out well.
Re: How do you like the Snowflakes on my 67
Posted: Thu May 17, 2012 9:22 pm
by BBF Roadster
These look like a perfect fit
I'll let you know how they fit
Thanks for the info
Re: How do you like the Snowflakes on my 67
Posted: Fri May 18, 2012 1:33 am
by Daryl Smith
I have the '82 280ZX Turbo wheels. Recently found a piece of paper with '5302 bulge Nut' scribbled on it......I think that was what I ordered at the time. Problem is the chrome is all peeling of them now....
Re: How do you like the Snowflakes on my 67
Posted: Fri May 18, 2012 6:25 am
by spl310
Back when the issue of the large shank lugs came to light, I suggested a bushing. Mike Harper had a bunch made up and sold a few. He may still have some, or if you have access to a lathe, they should be easy enough to make.
Re: How do you like the Snowflakes on my 67
Posted: Sun Jun 24, 2012 9:06 pm
by BBF Roadster
This lug nut fits perfectly on the snowflake wheels and come with attached washer.
Cost $2.49 each and $10 for shipping.
Thanks for all the help!
I have pics if anyone wants to see one, can't post here.
http://www.ezaccessory.com/Toyota_Lexus" onclick="window.open(this.href);return false; ... /5001t.htm
Re: How do you like the Snowflakes on my 67
Posted: Sun Jun 24, 2012 9:32 pm
by spl310
How is the chrome?
Re: How do you like the Snowflakes on my 67
Posted: Sun Jun 24, 2012 9:36 pm
by BBF Roadster
Chrome looks great, but time will tell.