Datsun Roadster Forum-311s.org

danimal2 wrote: There are two Nissan Part numbers for rear wheel cyclinders and I don't know which is which:
44100-14600
44100-25500

don't know what size these are and I can not find needed info. Any help on this one.

Thanks for all the help everone. But I am in need of some 3/4 Wheel cyclinders. What vender do you all Like to use.

Daniel

44100-14600 is the 13/16" for the early car
44100-25500 is the 3/4" for the late one,

Either size cylinder will work fine as long as you use the same size for both rear wheels.

Does anyone know of a cheaper alternative for these expensive rear brake cylinders?

23yrRebuild wrote:

danimal2 wrote: There are two Nissan Part numbers for rear wheel cyclinders and I don't know which is which:
44100-14600
44100-25500

don't know what size these are and I can not find needed info. Any help on this one.

Thanks for all the help everone. But I am in need of some 3/4 Wheel cyclinders. What vender do you all Like to use.

Daniel

44100-14600 is the 13/16" for the early car
44100-25500 is the 3/4" for the late one,

Either size cylinder will work fine as long as you use the same size for both rear wheels.

Does anyone know of a cheaper alternative for these expensive rear brake cylinders?

Thank you so much.

So does anyone know what car the 371 brake part number fits?

I too fell victim to bad auto parts look up SW and now am the pround owner of (2) sets (for sale cheap!)

we are dealer and have them in stock.used them on my own
jon

Dcyco1 wrote:I just bought some Beck Arnley shoes for the 510 and they worked. I got them at Advance auto parts for around $35.00. The part number in the wiki for Autozone is not correct. Those shoes are to small.

Do you have the correct # ?

Advance auto: Wearever #NB359 $17.99
Autozone Duralast #359 $17.99
NAPA Trustop TS359A $15.99

At least in NC!

Hmm... I just got the 510 pads from Advance. They are Beck Arnley 081-182 or something close to that. They are the same dimensions as the ones that came w/ my car (old) but they each have an extra "pad-eye" on them that I'm not sure of its purpose.

Dcyco1 - do yours have these? I guess I'll need to go get a pic now (and confirm that part number).

Cheers
James

OK here are the photos:

The shoes on my car: The Beck Arnley shoes and part number: Beck Arnley shoes:

If the measurements are correct, 9.0 X 1 and 9/16th's then I think you are fine with these. Those extra holes should not interfere with anything and look to be for other applications.
They should be fine!

I'd like to thank everyone who has posted here, the information was very useful. I found the correct brake shoes from Advance Auto Parts #S359 for my pre-june 1969 2000!

SEC wrote: ↑Mon Mar 16, 2020 7:32 pm I'd like to thank everyone who has posted here, the information was very useful. I found the correct brake shoes from Advance Auto Parts #S359 for my pre-june 1969 2000!

Great to hear! If i can suggest...Post up an introduction post under...Introductions. We love seeing new members and what they're working on!

GeoffM wrote: ↑Tue Mar 17, 2020 1:04 pm

SEC wrote: ↑Mon Mar 16, 2020 7:32 pm I'd like to thank everyone who has posted here, the information was very useful. I found the correct brake shoes from Advance Auto Parts #S359 for my pre-june 1969 2000!

Great to hear! If i can suggest...Post up an introduction post under...Introductions. We love seeing new members and what they're working on!

Yes sir, will do! I am all ears for any wisdom from others through this journey!