Re: Build in progress.
Posted: Wed Jun 27, 2012 6:22 am
Thanks for tbe info Michael!spriso wrote:If you buy an electronic speedo (such as an Autometer), to get the speedometer to work is a very simple two wire hook up (and your key-on power and ground hook up).
The Nissan speed sensor as a two wire output, and you hook those 2 wires to the back of the Autometer speedo-- it does not even matter which wire goes to the two posts for the speed sensor, it will work either way. You then just need to calibrate it with a GPS which is another simple procedure. There are lots of write ups about this on the web.
Michael
Marty