Datsun Roadster Forum-311s.org

Wow, that's a heck of a pause in a project! I thought I was bad
Eddie Wu's top is set up almost exactly like my 67.5. Here's a not very clear pic of the set-up on the hardtop. Looking forward to seeing the completed project Alvin, that smooth top is really nice.

Eddie's is a more elegant solution. But if you look around, you may be able to find a latch that would work without wrenches

This company is the leader http://www.destaco.com/greng/products.a ... tch+Clamps

I use a nut under the bracket and a rubber bushing inside the eye of the bolt.
That way I can adjust the pressure or lack of applied by the top. I run mine with a quarter to half inch clearance.

On further thought, if you don't take it on and off very often, then Tom/Eddie/ Phil's method makes sense, simple and works.

I have seen it done with wing nuts on the eye bolts too...

Mine has the wing nuts. Quick and easy. It looks like it would go on really fast if I ever take it off the ceiling an put it on the car!

dbrick wrote:On further thought, if you don't take it on and off very often, then Tom/Eddie/ Phil's method makes sense, simple and works.

I don't understand the wing nut!

After you get it set the first time, cut the EYE Bolt off and install a cap nut and a lock nut under the bracket. The tension adjustment is the same as for the soft top (on the body). Just two nuts and the clamps in front to install or remove.....actually faster than folding the soft top.....only minutes at most......harder to lift the top off.... LOL

Wing nut for late models, with the fixed pivot? I see Phil's point for the early cars, even use an acorn nut on the shortened eyebolt and jam it.

Does your softop bubble on the freeway? One more reason to get this hardtop finished

I am frantically trying to get this hardtop ready for the trip to Solvang
William re-layed some fiberglass and shot some paint




I already have the 3 windows weatherstripped(not fun) so now it's time to put it all together

Wow that will look great on the car, that's a heck of a shine, I love the smooth top!

Alvin, looks nice. I could actually use the bubble top on the 64, any extra headroom would be good. The hardtop Ninja85 just picked up was secured through the brass grommeted hole in the cockpit surround trim. I don't know if there is a flat area above there, but it was a very clean install.

Any pics of the final job Alvin?

still where I left it...chrome trim on, fasteners on, headliner in, no windows


will try to work on it before solvang

Looks very nice. I am rebuilding a high screen hardtop and am going to do mine in black too. Did you change the side connections or do you still need a spanner?