The Quick/Small/(Stupid?) Question Thread.

[Phred58]

Early / Late model oil dipsticks

Came across an oil dipstick with a bunch of other roadster parts. I know it's not for the later model roadsters but don't have any early model roadsters to compare it to. Can someone post a picture of an early dipstick so I can see if it's a roadster part and worth saving? I'd attach a picture to this post if I knew how to do so.

[Nissanman]

G15 dip stick.jpg

G15 dip stick marks.jpg

[DanR]

My '66 came with reupholstered door panels, but no escutcheons or window cranks, and handles that aren't attached. The attachment points on the door are just poking through small holes in the panel, how big should the holes in the panel be once I get the escutcheons?

[notoptoy]

Can you post a picture? I'm a bit confused as to what you are describing - r it's just too early for my brain to work!
What escutheons? The window crank has a small round plastic piece that goes arond the mehanism mounted around the door, and the handle goes over this.
The attached image is from the online parts catalog. Do you mean #91 and #87?

[DanR]

It would be 91 and 92, here is a pic from Dean's website. Should I make the hole just large enough for the handles to attach? As of right now they don't even go on all the way and have no clips

[notoptoy]

IF you keep the hole small, you should have no problems as you will need to enlage it when you do get the right parts - I'd say that's fine for now. For the clips, run by AutoZone or Advance auto and go to their "Help" section (By Dorman products) and they will have something that will work for you.

[youngen]

anyone know were i can buy a tach, speedometer, and a gas gauge that work?

[notoptoy]

Post on the forum in the " Classifieds wanted" section, and there is always E-bay!

[pebbles]

anyone know were i can buy a tach, speedometer, and a gas gauge that work?

What's wrong with the existing components? Tach and speedo are mechanical, check your cables.

[youngen]

ok thanks

[DanR]

Thanks a lot notoptoy, saved me a few bucks and they work just fine. Dorman part #76980
Original is bottom left, top is smaller assortment.

[23yrRebuild]

Can anyone help me identify this mystery part I've been hanging onto since 1980?

I'm thinking it is a part off my '67 SPL311, but I'm not sure...........

[notoptoy]

Thanks a lot notoptoy, saved me a few bucks and they work just fine. Dorman part #76980
Original is bottom left, top is smaller assortment.

Glad that worked out - I love those help things!!

[Linda]

Is the difference between the stock and comp sway bar determined by a circumference measurement or are there other differences to look for? I'm trying to see what I have on the car.
Thanks,
Linda

[pebbles]

Yes. A stocker is big as yur pinky and 23mm is big as yur thumb, mine anyway.