Page 17 of 17
Re: K24A2 swap into 66
Posted: Wed Jun 21, 2023 5:35 pm
by Ihiryu
Awesome build thread. Do you happen to have any photos of how you did the trans mount? I'm really debating the swap, but was thinking of using the RX8 trans instead of the NA/NB miata trans.
Re: K24A2 swap into 66
Posted: Sun Nov 12, 2023 7:39 pm
by rbhenderson
In for transmission mount details!
Re: K24A2 swap into 66
Posted: Thu Jan 25, 2024 11:47 am
by Slackline
For the trans mount, I made a plate that bolted to the tail shaft mount on the trans. Then drilled 2 holes up through the x member to line up with the holes in the plate. I used urethane suspension bushings between the x member and plate (with the bolt going through them) to insulate and raise the trans up off of the x member by 1/4 inch.
I'll see if I can find some pics.
Re: K24A2 swap into 66
Posted: Wed Jan 31, 2024 10:37 pm
by Slackline
Re: K24A2 swap into 66
Posted: Thu Feb 01, 2024 10:38 am
by rbhenderson
Slackline wrote: Wed Jan 31, 2024 10:37 pm
IMG_0047.JPG
Test post
Not sure what you're testing but I can see it! Looks like the transmission landed exactly where you'd want it