Meet Andy 68 spl strait pipe neighborhood terror
Moderators: notoptoy, S Allen, Solex68
- Tomakze
- Roadster Fanatic
- Posts: 420
- Joined: Wed May 14, 2008 11:53 pm
- Location: Greeley, Colorado
Re: Meet Andy 68 spl strait pipe neighborhood terror
The chrome... That paint... enough said.
Be sure to take some nice high resolution pictures when it is all put back together, because I want a new background for my computer!!!
Be sure to take some nice high resolution pictures when it is all put back together, because I want a new background for my computer!!!

-70 Datsun SRL311 viewtopic.php?f=27&t=11900
-85 Nissan 300zx Turbo http://311s.org/phpBB3/viewtopic.php?f=24&t=18563 -Sold
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3931
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: Meet Andy 68 spl strait pipe neighborhood terror
ew, uh, well, that may be embarrassing for me. Its mostly used crusty stuff. just cleaned up. Andy is a ten footer. you dont wanna see the rear bumper 

David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- Tomakze
- Roadster Fanatic
- Posts: 420
- Joined: Wed May 14, 2008 11:53 pm
- Location: Greeley, Colorado
Re: Meet Andy 68 spl strait pipe neighborhood terror
Easy. Take a picture from ten feet away, looking at the front of the car!pebbles wrote:ew, uh, well, that may be embarrassing for me. Its mostly used crusty stuff. just cleaned up. Andy is a ten footer. you dont wanna see the rear bumper

Besides, don't be so hard on yourself... Andy is a beauty now!

-70 Datsun SRL311 viewtopic.php?f=27&t=11900
-85 Nissan 300zx Turbo http://311s.org/phpBB3/viewtopic.php?f=24&t=18563 -Sold
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3931
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: Meet Andy 68 spl strait pipe neighborhood terror
Thanks,
these pics are about 4-6 feet. I want to get to Kelowna,,,,,Im sure Ted will take a ton of pics.
Last year I drove to a drops meeting and he took a pic of my hose clamped wiper pivots,,,, that guy is tough!
been quite a journey. Honestly, Ill probably polish the paint over the winter. maybe get some chrome done too.
these pics are about 4-6 feet. I want to get to Kelowna,,,,,Im sure Ted will take a ton of pics.
Last year I drove to a drops meeting and he took a pic of my hose clamped wiper pivots,,,, that guy is tough!
been quite a journey. Honestly, Ill probably polish the paint over the winter. maybe get some chrome done too.
You do not have the required permissions to view the files attached to this post.
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
-
- Roadster Nut
- Posts: 67
- Joined: Sat May 14, 2011 10:41 am
- Location: Portland,OR
Re: Meet Andy 68 spl strait pipe neighborhood terror

Need more pics!!!!

Looks great by the way- even 18 inches from my laptop!

69 roadster project
- Datsun.David
- Site Supporter
- Posts: 1188
- Joined: Sat Sep 03, 2011 12:18 am
- Location: Calgary, Alberta, Canada
- Contact:
Re: Meet Andy 68 spl strait pipe neighborhood terror
Wow! Great colour! Looks beautiful! Can't wait to check it out in Kelowna. Met Ted in Solvang. He seems like a great guy. I am sure Kelowna will be a blast!
67.5 SRL311 #00050 - Silver - SU
67.5 SRL311 #00544 - Sora Blue SU
68 Roadster Race Car
69 SRL311
69 SRL311
72 PL510
74 260Z - Silver
67.5 SRL311 #00544 - Sora Blue SU
68 Roadster Race Car
69 SRL311
69 SRL311
72 PL510
74 260Z - Silver
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3931
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: Meet Andy 68 spl strait pipe neighborhood terror
692000 wrote:You can't paint a car and only post 2 pics!!!
Need more pics!!!!
Looks great by the way- even 18 inches from my laptop!
Im hoping to get the lights sorted and get the bonnets on this weekend. roll it outside if its nice. polish a few spots. Canby for sure.
Sports Imports is sending a few critical pieces ,,,,, Thanks Ross.
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3931
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: Meet Andy 68 spl strait pipe neighborhood terror
FAIL
Good stuff
You do not have the required permissions to view the files attached to this post.
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- notoptoy
- Vendor-Site Supporter
- Posts: 9700
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: Meet Andy 68 spl strait pipe neighborhood terror
Looks great, what was the fail, the fit of the headlight chrome, causing the mar?
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Meet Andy 68 spl strait pipe neighborhood terror
Isn't there some rope-like weatherstripping for the headlight buckets? Might help protect.
Paint looks great.
Linda
Paint looks great.
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
- Gregs672000
- Roadster Fanatic-Site Supporter
- Posts: 9428
- Joined: Fri Aug 07, 2009 11:47 pm
- Location: Tacoma, WA
Re: Meet Andy 68 spl strait pipe neighborhood terror
Looks freakin beautiful to me man! I would like to hear about this gasket Linda mentioned.
Greg Burrows
'67 2000 #588
Tacoma, WA
'67 2000 #588
Tacoma, WA
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3931
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: Meet Andy 68 spl strait pipe neighborhood terror
Yes.notoptoy wrote:Looks great, what was the fail, the fit of the headlight chrome, causing the mar?


This fender had OG paint on it and there was an identical blemish in the lead. I sanded the lead til the blemish was gone, fit the ring, so I thought, obviously not enough.
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3931
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: Meet Andy 68 spl strait pipe neighborhood terror
Andys left ring had a weatherstrip of sorts. Previous "bodyman" packed the backside of the scoop with bondo and pressed it on. I spent a good hour or more chipping it out.Linda wrote:Isn't there some rope-like weatherstripping for the headlight buckets? Might help protect.
Paint looks great.
Linda
Last edited by pebbles on Fri May 04, 2012 2:39 pm, edited 1 time in total.
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- Alvin
- Roadster Nut-Site Supporter
- Posts: 8381
- Joined: Tue Jan 23, 2007 7:01 pm
Re: Meet Andy 68 spl strait pipe neighborhood terror
yowza!
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3931
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: Meet Andy 68 spl strait pipe neighborhood terror
^ hel ya Im proud of that cowl, 10 hours workin out the crowbar damage. 8 more sanding for paint,,,straightest part of the car.
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."