Page 12 of 12
Re: 69 SRL 07024 resto custom
Posted: Wed Feb 13, 2019 12:48 am
by pebbles
ACote wrote: Mon Feb 11, 2019 9:44 pm
Time to bust out the cardboard design! Car will be so fresh and ready for the snow when you're done.
Not sure. Make a whole new bulkhead, or splice 2/3 new. Hard to get outa there. Leaning toward a splice. Top half is solid.
Ive been hole punching the car, and welding to the new metal as often as possible. Seems to take much better that way.
Think Ive had my fill of snow in a Roadster lol.
.
F4F3B3FA-3E18-45B4-84D0-C9381A355257.jpeg
Re: 69 SRL 07024 resto custom
Posted: Sun Feb 17, 2019 10:05 pm
by pebbles
Went to the shop to take a pic of bulkhead vinyl for Acote and totally spaced, soory bud will do tomorrow.
Spliced the bulkhead with flat plate. Added a bottom plate.
.
099D085E-AF84-4934-B2B6-05B531F11EBC.jpeg
.
Cut a chunk from an old fender, didnt have a floorpan piece big enough.
.
67BE808C-4E7E-49D4-B585-00732498D7F8.jpeg
.
Will finish up the last section next year for Ted lol.
.
BFD461AB-8C73-4605-ACBC-20161D7FACE8.jpeg
Re: 69 SRL 07024 resto custom
Posted: Sun Feb 17, 2019 10:19 pm
by ted heaton
pebbles wrote: Sun Feb 17, 2019 10:05 pm
Went to the shop to take a pic of bulkhead vinyl for Acote and totally spaced, soory bud will do tomorrow.
Spliced the bulkhead with flat plate. Added a bottom plate.
.
099D085E-AF84-4934-B2B6-05B531F11EBC.jpeg
.
Cut a chunk from an old fender, didnt have a floorpan piece big enough.
.
67BE808C-4E7E-49D4-B585-00732498D7F8.jpeg
.
Will finish up the last section next year for Ted lol.
.
BFD461AB-8C73-4605-ACBC-20161D7FACE8.jpeg
Good thing the roadster will have SR20 power.
It will weigh 100 lbs more from all the welding!
Ted
Re: 69 SRL 07024 resto custom
Posted: Mon Feb 18, 2019 11:27 am
by pebbles
Re: 69 SRL 07024 resto custom
Posted: Thu May 23, 2019 7:31 pm
by pebbles
Finally got rid of the last L320. SRL 311-03103 mule chassis freed!
.
C9076248-F394-478C-BC0A-1880A3A6251C.jpeg
.
Mule chassis cleaned and stashed for the moment (not Ted moments)
.
7D910593-8732-4C1B-927B-C25845A6DCE2.jpeg
.
If anyone wants to claim this pretty decent SRL chassis, I will gladly let it go... when im done lol
Re: 69 SRL 07024 resto custom
Posted: Thu May 23, 2019 9:34 pm
by ted heaton
