Page 2 of 2
Re: Upper and Lower spindle bushing and spindle install
Posted: Sun Sep 19, 2021 12:28 pm
by PF044
There are no cut threads in the arms as they come from the factory. They are smooth inside and (maybe?) get 'deformed' on install of the bushing onto the spindle through the arm.
Maybe they are worn out?
Upper Screenshot .jpg
lowerer screenshot.jpg
Re: Upper and Lower spindle bushing and spindle install
Posted: Sun Sep 19, 2021 1:19 pm
by Curtis
A couple of my A arms were boogered a bit and the flapper wheel fixed that.
Re: Upper and Lower spindle bushing and spindle install
Posted: Sun Sep 26, 2021 2:33 pm
by Egz
Well you guys were right. I decided to bite the bullet and just send it. Hit them with the impact, and they spun all the way down. Didn't expect it, considering they were so far out before binding. Thanks!
Re: Upper and Lower spindle bushing and spindle install
Posted: Sun Sep 26, 2021 5:52 pm
by Gregs672000
Glad you got it sorted out. I understand your caution, but sometimes a "big hammer" IS the right TOOL! Onward!