Page 2 of 2
Re: Stock wheel centers on 15" wheel?
Posted: Wed Jun 05, 2019 1:18 pm
by GoldHawg
Picked up a set of 200SX wheels yesterday for $40 locally; rough (rusty and all the tires have dry rot) but worth $40 just to see if something might be done. Looks like there is the ~30mm room on the wheel to go inboard with the center if one cuts it out and rewelds. Would still have to have a clip welded on to hold the center cap.
Re: Stock wheel centers on 15" wheel?
Posted: Thu Jun 06, 2019 1:42 pm
by Pjackb
40$ is cheap
Looking at the pictures it would definitely look better if they were re welded
looking forward to see the results if you do it
Re: Stock wheel centers on 15" wheel?
Posted: Sun Jan 05, 2020 12:05 pm
by Pjackb
did you ever end up doing anything with this ?
Also would it be possible for you to take the measurement of the ID at the center of the wheel ( the distance between the 2 arrows )
Thanks
InkedIMG_1547_LI.jpg
Re: Stock wheel centers on 15" wheel?
Posted: Tue Jan 07, 2020 9:33 pm
by GoldHawg
Nothing yet; they're stored for a potential "one day". Trying to get my current build done and I'm way behind. Best I can measure is between 13 3/16 and 13 1/4. See pic.
Re: Stock wheel centers on 15" wheel?
Posted: Wed Jan 08, 2020 10:48 pm
by Pjackb
Thanks
It answers 2 of my questions
1-Stock wheel centers will not fit
2- there’s plenty of room should one want to have the centers moved in to change the offset , based on this picture there’s more than 1 1/4 inch of play moving them 1inch would make the offset about +15 which is perfect with a 6inch wheel