Page 2 of 2
Re: Greetings
Posted: Sat Jan 05, 2019 3:00 am
by pebbles
syopap wrote: Sat Jan 05, 2019 12:25 am
I have been in the United States for seven years, but I still can not speak English well (it is even harder to hear)
But I think that the forum is fine as it can understand slowly and understand without worrying about time.
I go back to Japan at least twice a year on a business trip and I will procure any accessories or parts that are difficult to obtain in the US!
Welcome Yoshi,
If you bring factory hardtop you will have many friends
Re: Greetings
Posted: Sat Jan 05, 2019 11:31 am
by C.Costine
Welcome Yoshi, and congratulations on your roadster! The low windshield, flat dash early ones are as you say elegant compared to the later ones. It appears that you will need to start with removing the body and getting it "dipped" in order to address the rust problem. I spent many months cutting rusty metal out and welding new metal in.
Re: Greetings
Posted: Sat Jan 05, 2019 1:58 pm
by syopap
C.Costine wrote: Sat Jan 05, 2019 11:31 am
Welcome Yoshi, and congratulations on your roadster! The low windshield, flat dash early ones are as you say elegant compared to the later ones. It appears that you will need to start with removing the body and getting it "dipped" in order to address the rust problem. I spent many months cutting rusty metal out and welding new metal in.
Thank you for the advice. It was difficult to find a good Roadster of low windshield. I am prepared to finish this car elegantly even if it takes time.
Re: Greetings
Posted: Sat Jan 05, 2019 6:44 pm
by GeoffM
Welcome!
I see you have two shop helpers who are already anticipating a ride!
Re: Greetings
Posted: Sat Jan 05, 2019 9:58 pm
by syopap
GeoffM wrote: Sat Jan 05, 2019 6:44 pm
Welcome!
I see you have two shop helpers who are already anticipating a ride!
Oh yes, The rear compartment needs a comfortable rug!!
Thank you
Re: Greetings
Posted: Wed Jan 16, 2019 11:02 am
by S Allen
Yoshi,
Glad you joined us. Do not be afraid to ask for help as there is plenty of it here. Good luck with your project.
Steve