Page 2 of 2
Posted: Mon May 09, 2005 12:57 pm
by ppeters914
Yeah, the 914 folks swear by 'em. Here's another link rather than evilBay:
http://www.pelicanparts.com/catalog/sho ... es_pg5.htm
Summit Racing also has 'em.
Posted: Mon May 09, 2005 2:39 pm
by Datrock
I was wondering how these work on the late models with the 2 resivors. I read the info and they state working on a round res. under 3.5 inches but nothing about 2 at once. Or do you hook up the rear brakes then move on to the front. I definately like the idea of using one of these. Mainly since you can do it all by yourself... Bill
RE:Motive Power Bleeders
Posted: Mon May 09, 2005 4:58 pm
by S Allen
These little jewels work great but you have to do one reservoir at a time which is no problem. I purchased the universal one. They are realtively cheap as well. The only problem is when you do not get a good seal on the reservoir brake fluid goes all over. Not too good on the paint.
I also had to modify the cap by cutting some off the get it to fit on the early single brake master as the cap hit the top lip of the firewall and never would seal. Once you get it fit correctly they work like a champ. Speed bleeders would be another nice addition.
Steve