Page 2 of 2
Re: Rear Diff Swap Questions
Posted: Fri Nov 23, 2012 4:58 pm
by sports imports
I would check to see if your 5.125 has the 4 mm ring gear spacer. If it does, then you remove it before installing the 3.7 or 3.9 ring and pinion.
Ross
sports imports
Re: Rear Diff Swap Questions
Posted: Fri Nov 23, 2012 6:24 pm
by Steve49841
We aren't doing a ring and pinion, we are swaping the entire center section, 5:13 out...3:90 in.
Re: Rear Diff Swap Questions
Posted: Sat Nov 24, 2012 3:53 am
by SLOroadster
It should be a plug and play.
Will