Re: Not Much Wheel Selection
Posted: Sun Jan 31, 2021 2:11 pm
Here they are
Ahhhh yes, the General Lee wheels!
Very popular on roadsters, "American Racing Vector"
just a sample: Victor (RIP) and Leigh's
Datsun Roadster Forum-311s.org
The Resource For All Things Datsun Roadster S211/SPL212/310/311 Datsun Sports Roadster 1959-April 1970 circa 40,000 produced
https://www.311s.org/phpBB3/
Not Much Wheel Selection
Page 10 of 12
Re: Not Much Wheel Selection
Posted: Sun Jan 31, 2021 6:40 pm
Very popular on roadsters, "American Racing Vector"
just a sample: Victor (RIP) and Leigh's
Re: Not Much Wheel Selection
Posted: Mon Feb 01, 2021 11:11 am
The wheels in the pic have ten holes. Do the Mazdas come in eight and ten?spl310 wrote: Mon Sep 21, 2020 8:53 amI believe that I was correct above:
https://www.stockwheels.com/mazda-rx7-1 ... -wheel-rim?
Re: Not Much Wheel Selection
Posted: Sun Mar 14, 2021 11:41 pm
Re: Not Much Wheel Selection
Posted: Tue Jun 08, 2021 1:31 am
Has anyone re-rim the original steel wheels for wider tires. I saw a Volvo pv444 with wider rims on the stock hubs and caps it looked pretty sweet and sleepy.
John Sirois
67 1600/2000
Boxford MA
John Sirois
67 1600/2000
Boxford MA
Re: Not Much Wheel Selection
Posted: Tue Jun 08, 2021 10:40 am
yesjohn sirois wrote: Tue Jun 08, 2021 1:31 am Has anyone re-rim the original steel wheels for wider tires. I saw a Volvo pv444 with wider rims on the stock hubs and caps it looked pretty sweet and sleepy.
John Sirois
67 1600/2000
Boxford MA
Re: Not Much Wheel Selection
Posted: Tue Jun 08, 2021 10:02 pm
Yesjohn sirois wrote: Tue Jun 08, 2021 1:31 am Has anyone re-rim the original steel wheels for wider tires. I saw a Volvo pv444 with wider rims on the stock hubs and caps it looked pretty sweet and sleepy.
John Sirois
67 1600/2000
Boxford MA
viewtopic.php?f=34&t=32538
sdb8100 wrote: Thu Nov 07, 2019 4:51 pm HERE'S WHEN THEY CAME BACK FROM THE SHOP COMPARED TO ORIGINAL
Re: Not Much Wheel Selection
Posted: Wed Oct 20, 2021 4:50 pm
Just found these old school jdm wheels wondering if they will fit the guy says he will get me the offset a couple days ago but hasn't. I've posted a screen grab with the offset stamped but I can barely make it out. What do you guys think, haven't really seen these on a roadster.
Re: Not Much Wheel Selection
Posted: Wed Oct 20, 2021 4:51 pm
+16?
Re: Not Much Wheel Selection
Posted: Wed Oct 20, 2021 6:38 pm
‘XCITING’ knock-off of BBS center locks with turbine hat sections, but look good!
Agree with ‘+16’
Agree with ‘+16’
Re: Not Much Wheel Selection
Posted: Wed Oct 20, 2021 7:09 pm
Would they work
Re: Not Much Wheel Selection
Posted: Wed Oct 20, 2021 9:05 pm
If you can confirm that the center bore is at least 73mm wide and bolt pattern is 4x114.3 then you should be good!
Re: Not Much Wheel Selection
Posted: Thu Oct 21, 2021 3:53 am
Re: Not Much Wheel Selection
Posted: Thu Oct 21, 2021 10:26 am
These are Autobahn Xciting X1 from the early 80s and not very commonahgrafx wrote: Wed Oct 20, 2021 4:50 pm PSX_20211020_144823.jpgJust found these old school jdm wheels wondering if they will fit the guy says he will get me the offset a couple days ago but hasn't. I've posted a screen grab with the offset stamped but I can barely make it out. What do you guys think, haven't really seen these on a roadster.
14x6.33 with an offset of +16 Center bore is not published but these were made for JDM cars of that era and most likely a 73-76mm CB
Those specs will work perfectly with your 67.5 (they would stick out on a 65-67) if dropped 195/60/14s are a good choice but (195/65/14are better IMO)
Not sure how they will look on a roadster but they would be awesome on a 510
Re: Not Much Wheel Selection
Posted: Thu Oct 21, 2021 4:13 pm
Pjackb wrote: Thu Oct 21, 2021 10:26 amThanks pjack what is different about the 67.5 versus the 65-67 that works make then stick out? Different rear end?ahgrafx wrote: Wed Oct 20, 2021 4:50 pm PSX_20211020_144823.jpgJust found these old school jdm wheels wondering if they will fit the guy says he will get me the offset a couple days ago but hasn't. I've posted a screen grab with the offset stamped but I can barely make it out. What do you guys think, haven't really seen these on a roadster.
These are Autobahn Xciting X1 from the early 80s and not very common
14x6.33 with an offset of +16 Center bore is not published but these were made for JDM cars of that era and most likely a 73-76mm CB
Those specs will work perfectly with your 67.5 (they would stick out on a 65-67) if dropped 195/60/14s are a good choice but (195/65/14are better IMO)
Not sure how they will look on a roadster but they would be awesome on a 510