Page 9 of 11
Re: My new SPL311!!
Posted: Mon Aug 08, 2016 1:35 pm
by Gregs672000
Wow, very cool... Got caught up over the several posts. Love the pedals, how did you do that and what did you use?
Re: My new SPL311!!
Posted: Mon Aug 08, 2016 4:10 pm
by zippy67roadster
Gregs672000 wrote:Wow, very cool... Got caught up over the several posts. Love the pedals, how did you do that and what did you use?
I bought the set on ebay after seeing that the basic dimensions would fit our stock pedals. I then measured and drilled holes on the existing pedals to bolt the new ones on. The clutch and brake pedals kind of slide over the bottom of the pedal and then I bolted them at the top. The gas pedal goes right on top and was bolted on. I really like the extra heel area on it.
Re: My new SPL311!!
Posted: Thu Aug 11, 2016 2:19 pm
by zippy67roadster
[align=center]So I want to make sure that the cars behind me (and I hope that is most of the field 
) can see when I brake I purchased some inexpensive LED fog lights on eBay and used them in place of the stock pigtails and bulbs. The pictures show them lit with nothing more than a 9 volt battery so they should be quite a bit brighter when hooked up to the system. They are 10 watt and there was some modification of the fog lights to get them to work. I will post some more pictures this weekend of the fog lights and what I did to them to make them work.[/align]
Re: My new SPL311!!
Posted: Sun Aug 14, 2016 10:11 pm
by zippy67roadster
So I finished mounting the fuel cell in the trunk. I cut out the opening then used square tubing welded to the frame to reinforce it. I still need to pick up the longer bolts so I can bolt it to the square tubing. I am also looking to make a partial cage around the portion that faces the rear to protect it from any future rear end incidents.
Re: My new SPL311!!
Posted: Tue Aug 23, 2016 10:30 pm
by zippy67roadster
So with having to have shoulder surgery in less than 2 weeks I decided the bodywork was good enough for a race car and painted it today! I chose Primrose Yellow. It will have the BRE stripes in black on the fenders. It turned out really well and I could get away with not cutting and buffing it but I want it to really shine! I will cut and buff it prior to the surgery and will have Keith Williams and Chuck Grohs come up and help a one armed man put it together. I plan to be healed up enough to attend VARA University in January.
Re: My new SPL311!!
Posted: Tue Aug 23, 2016 10:36 pm
by notoptoy
That looks GREAT Brian, congrats on the progress and good luck with the surgery.
Re: My new SPL311!!
Posted: Wed Aug 24, 2016 5:38 am
by cktrap
looks great, love the color. I hope the surgery and the rehab goes well.
Re: My new SPL311!!
Posted: Fri Aug 26, 2016 2:38 pm
by zippy67roadster
cktrap wrote:looks great, love the color. I hope the surgery and the rehab goes well.
Thanks! I hope to be healed enough to attend VARA University in January.
Re: My new SPL311!!
Posted: Fri Aug 26, 2016 7:43 pm
by keith0alan
Don't make me drive the car for you!
Re: My new SPL311!!
Posted: Sat Sep 03, 2016 12:05 am
by zippy67roadster
keith0alan wrote:Don't make me drive the car for you!
If that is what it takes!!
Re: My new SPL311!!
Posted: Sat Sep 03, 2016 6:50 am
by msampsel
zippy67roadster wrote:keith0alan wrote:Don't make me drive the car for you!
If that is what it takes!!
Nice work guys.
I'd want a video. Expect I could tell who was driving from the lack of, or existence of, a beard swaying to the corners
Re: My new SPL311!!
Posted: Sat Nov 05, 2016 12:16 am
by zippy67roadster
I finally got the roll cage done. People keep saying it looks too tall but it was made to save me if I end up with the wrong side down. Anyway, I will be putting the motor in and connecting up all of the systems next weekend. Keith is nearly finished putting the motor together!! Keith and Chuck are going to come up and help with the final assembly. Hopefully we can get it fired! I decided to put the front of the car together to see how it would look. The hood and grill will come back off until the motor is in. I really like the headlight grilles I found!!
Re: My new SPL311!!
Posted: Wed Nov 16, 2016 1:23 am
by zippy67roadster
I had a visit from Chuck and Keith, my Roadster buddies from Vegas, this past weekend. They came up to get the car back on track after my shoulder surgery. We got quite a bit completed. We put the motor and transmission in, mounted the radiator and the accusump system, plumbed most of the accusump system, mounted the battery box, mounted the fuel pump, filter and regulator. Keith made some custom mounts for the oil cooler and we installed it. I will finish painting the cage this week and install the roll cage padding and seat. The guys will be back up in a couple weeks to finish putting it together and start it for the first time!!
Re: My new SPL311!!
Posted: Wed Nov 16, 2016 1:34 am
by Alvin
Don't sweat the folks saying your roll bar "looks too tall". They're idiots. Wait, are they on 311s?
Love the setup! When is the first test/track day?
Re: My new SPL311!!
Posted: Wed Nov 16, 2016 9:58 am
by spl310
The bar isn't too tall, the car is too short