I am also reinstalling the front steering and suspension on my '68 and I have two questions.
What is the steering box supposed to be filled with? Grease or some kind of heavy oil?
Where can I get replacement boots for the tie-rod ends? Someone mentioned urethane. Where can I get those? Who's got the best deal on OEM?
Steering Questions
Moderators: notoptoy, S Allen, Solex68
- SLOroadster
- Roadsteraholic
- Posts: 5360
- Joined: Sun Dec 08, 2002 2:53 am
- Location: Napa Ca
- S Allen
- Site Admin
- Posts: 4572
- Joined: Thu Dec 05, 2002 4:57 pm
- Location: Knoxville, IA(Lake Redrock)Emory, TX
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
RE:Urethane Boots
Dean-Fairlady Products has the complete set of urethane boots for the front suspension.
Steve
Steve
66 Stroker-Going Orange
67 SRL311-00279-resto project
Stock '72 240Z-Blue
2002 Ford F250 7.3 Diesel 2WD Hauler
2008 Toyota FJ Cruiser
2009 Smart ForTwo Passion Coupe
2013 Fiat 500 Abarth
67 SRL311-00279-resto project
Stock '72 240Z-Blue
2002 Ford F250 7.3 Diesel 2WD Hauler
2008 Toyota FJ Cruiser
2009 Smart ForTwo Passion Coupe
2013 Fiat 500 Abarth
- mgslayer
- Roadster Fanatic
- Posts: 206
- Joined: Tue Oct 19, 2004 9:13 pm
- Location: Taneytown Maryland
Steve
I bought mine from Dean and they look good. I just haven't had a chance to put them on yet. If you are installing/have installed new balljoints, I'd say put the urethane boots on those as well to protect your investment. I put NOS front end parts on my Beast about 10 years ago, and the original rubber boots have all but fallen apart on most.
Just another Roadster Winter Project I need to get to ..........
Happy Wrenching
Mark
I bought mine from Dean and they look good. I just haven't had a chance to put them on yet. If you are installing/have installed new balljoints, I'd say put the urethane boots on those as well to protect your investment. I put NOS front end parts on my Beast about 10 years ago, and the original rubber boots have all but fallen apart on most.
Just another Roadster Winter Project I need to get to ..........
Happy Wrenching
Mark
Mark
Taneytown MD
1968 SRL311
Taneytown MD
1968 SRL311