Firewall Grommets and Plugs

[JFBrink]

Hey, gang,

Now that my swap is a driver, I'm getting into some fiddly bits. The swap left a number of open holes in my firewall that are now empty (no chokes!) and a few other holes that now have more in them than they did before (lots of EFI wiring). I would like to dress these holes properly.

Does anyone know of a good source for firewall grommets and rubber plugs where you can buy by dimension, in small quantities?

Thanks,

Jesse.

[datsunrides]

McMaster Carr has a large selection. They have a very good online catalog. Lot sizes are kinda large, but you can get medium sized grommets in a 25 count for under $15. Check all options because a grommet just 1/32 different in a dimension may have a way different count and price.

Mark

[datsun1500]

Dean has a package that includes all of the grommets inthe right sizes. The main issue with trying to find them on your own is you need to buy 25 in a bag for the 1 or 2 that you need. You end up buying 150 grommets....

http://www.datsunparts.com/1302" onclick="window.open(this.href);return false;

[dynaguy]

I have a good supply of black nylon hole plugs. PM me with hole diameters and qtys., will be happy to send you what you need. Cost of shipping only. Pat Mahoney '69 sr20 project on hold, Dream Shop/Home project starting this spring

[FergO2k]

I have had some good success in the "PVC valve" section in Pep Boyz. The PVC (blowby filter) hardware on american iron needs a rubber grommet to seal to the air cleaner, and the sizes are similar / close enough to fit.
Pat's rubber plugs would probably be a much better (longer lasting) solution.