brake volvo conversion

[Rkeyracer5]

I'm currently converting my Datsun Roadsters front brake calipers to the volve brake calipers conversion. I cannot complete the conversion until I locate a machine shop to turn down the outside rotor diameter. Does anyone know of anyone located in the Inland Empire area that can turn down the rotors. If not local please inform me of a online machine shop.

Thank you in advance,

Dan
Rkeyracer5@aol.com

[ppeters914]

Welcome. Please fill in the Location field in your user profile.

Where is the Inland Empire?

[spl310]

Where is the Inland Empire?

Well, duh! It is inland!! Sheesh... Just kidding!! It is somewhere in Kalifornia. Near Modesto I think? What do I know, I am in Florida...

[fj20spl311]

Where is the Inland Empire?

Well, duh! It is inland!! Sheesh... Just kidding!! It is somewhere in Kalifornia. Near Modesto I think? What do I know, I am in Florida...

Medesto would be a long drive North from the Inland Empire.....


Try Riverside.......

Almost any brake shop can do it.......try a six pack.

Phil

[spl310]

Like I said, what do I know, I am from Florida! Heck on the desktop globe Modesto and Riverside would almost be touching...

[Datsa 66]

The Inland Empire is basically directly East of Los Angeles, about 50 miles "Inland" from the coast. It consists primarily of Riverside/San Bernardino/Corona areas. There is a pretty big group of roadster people out there including SoCalROC evangelist (actually he is a real chaplin) Chris Breyer.

Welcome and good luck with the conversion. I had this conversion done and while it costs pretty much the same as roadster brakes, the big plus is much better parts availability.

Andrew Murphy

[Jack Maskell]

What's involved in this conversion? Thanks

[ppeters914]

What's involved in this conversion? Thanks

Read all about it in the TechWiki:

http://www.311s.org/pmwiki-311/pmwiki.p ... voCalipers