I am getting ready to mount my front fenders. When I removed the fenders over a year ago, I recall a thin foam type material between the fender and the body where it mounts at the rear. (Running verticaly behind the door). Is this material available? Is there something else I could use? Any other tips or advice on mounting these? I will be taking it to be painted in a couple of weeks. Thanks in advance.
Kyle
Fender material question
Moderators: notoptoy, S Allen, Solex68
- Skyman
- Roadster Fanatic-Site Supporter
- Posts: 2397
- Joined: Thu Dec 15, 2005 6:49 pm
- Location: Salt Lake City, Utah
- S Allen
- Site Admin
- Posts: 4542
- Joined: Thu Dec 05, 2002 4:57 pm
- Location: Knoxville, IA(Lake Redrock)Emory, TX
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
RE:Foam Strip
Any good body supply store should carry the sealing foam. They usually have it in varying widths and thicknesses. It comes with an adhesive backing on one side.
Steve
Steve
66 Stroker-Going Orange
67 SRL311-00279-resto project
Stock '72 240Z-Blue
2002 Ford F250 7.3 Diesel 2WD Hauler
2008 Toyota FJ Cruiser
2009 Smart ForTwo Passion Coupe
2013 Fiat 500 Abarth
67 SRL311-00279-resto project
Stock '72 240Z-Blue
2002 Ford F250 7.3 Diesel 2WD Hauler
2008 Toyota FJ Cruiser
2009 Smart ForTwo Passion Coupe
2013 Fiat 500 Abarth