My friends:
You will see a lot of questions from me now that I'm preparing to start my engine for the first time.....
I know I asked, and someone answered my question about the proper valve clearance adjustment cold........but I can't find where I read the answer! I know that hot is the way to do it right, but I wanna have everything at least close to right, to minimize the possibility of any UPS! or "F**K....what the F**k happened!?!" kind of complications. Please help!
By the way... are there supposed to be any lock washers on the nuts that secure the rocker mechanism to the head? And what is the correct torque for these?
Thanks again everyone!
Jorge
Valve Clearance COLD?
Moderators: notoptoy, S Allen, Solex68
-
S Allen
- Site Admin
- Posts: 4572
- Joined: Thu Dec 05, 2002 4:57 pm
- Location: Knoxville, IA(Lake Redrock)Emory, TX
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
RE:Valve Clearance
Brian says:
<Oringinal post>Cold is .002 closer than hot.<Oringinal post>
Should read "Cold is .002 farther apart than hot. Metal expands and closes the gap." SA
_________________
Brian H
69 2000
Tampa, FL
As to the rocker arm bolts I do not believe there are any lock washers on them. I do not know off hand what the torque for those would be either. I will try to look it up when I get home tonight.
Steve
<Oringinal post>Cold is .002 closer than hot.<Oringinal post>
Should read "Cold is .002 farther apart than hot. Metal expands and closes the gap." SA
_________________
Brian H
69 2000
Tampa, FL
As to the rocker arm bolts I do not believe there are any lock washers on them. I do not know off hand what the torque for those would be either. I will try to look it up when I get home tonight.
Steve
Last edited by S Allen on Tue Dec 16, 2003 12:43 pm, edited 1 time in total.
66 Stroker-Going Orange
67 SRL311-00279-resto project
Stock '72 240Z-Blue
2002 Ford F250 7.3 Diesel 2WD Hauler
2008 Toyota FJ Cruiser
2009 Smart ForTwo Passion Coupe
2013 Fiat 500 Abarth
67 SRL311-00279-resto project
Stock '72 240Z-Blue
2002 Ford F250 7.3 Diesel 2WD Hauler
2008 Toyota FJ Cruiser
2009 Smart ForTwo Passion Coupe
2013 Fiat 500 Abarth
-
Guest
Steve:
Now I remember Brian's reply regarding valve clearance....but still can't remember or find where it was! As to the rockers, thanks for the info, and for following up on the torque. I have one of the Nissan's original manuals (the ones with the really bad english!) but nothing on the torque. Thanks again Steve...and of course, Brian!
Jorge
Now I remember Brian's reply regarding valve clearance....but still can't remember or find where it was! As to the rockers, thanks for the info, and for following up on the torque. I have one of the Nissan's original manuals (the ones with the really bad english!) but nothing on the torque. Thanks again Steve...and of course, Brian!
Jorge