SU SIDE DRAFT CARBS, TUNE UPS
Moderators: notoptoy, S Allen, Solex68
-
- Roadster Newby
- Posts: 9
- Joined: Tue May 23, 2023 12:24 pm
- Location: PEORIA AZ
- Model: 1500/1600
- Year: High Windshield-68-70
SU SIDE DRAFT CARBS, TUNE UPS
I'm looking for a shop in the Phoenix Az. area that can tune, balance/sync the SU style side draft carbs on my 1970 Datsun 1600 Roadster. Any suggestions? thx Keith
- fj20spl311
- Roadsteraholic
- Posts: 5038
- Joined: Mon Nov 28, 2005 3:54 pm
- Location: San Diego, Ca
Re: SU SIDE DRAFT CARBS, TUNE UPS
I don't know anything about these garages, but would bet they are all capable to work on your SUs
i hope these are from a current list lol
G & B Enterprises
3415 West Lincoln Street
Phoenix
Tel: (602) 415-1846
Fax: (602) 272-4575
Contact: Bob or Gil Schaulin <GBMG@aol.com>
British Motor Classics, Ltd. (BMC)
8828 N. Black Canyon Highway
Phoenix, AZ 85051
USA
Tel: (602)995-2028
British Sportscar Service
4025 East University
Phoenix
Tel: 602-437-2037
i hope these are from a current list lol
G & B Enterprises
3415 West Lincoln Street
Phoenix
Tel: (602) 415-1846
Fax: (602) 272-4575
Contact: Bob or Gil Schaulin <GBMG@aol.com>
British Motor Classics, Ltd. (BMC)
8828 N. Black Canyon Highway
Phoenix, AZ 85051
USA
Tel: (602)995-2028
British Sportscar Service
4025 East University
Phoenix
Tel: 602-437-2037
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
-
- Roadster Newby
- Posts: 9
- Joined: Tue May 23, 2023 12:24 pm
- Location: PEORIA AZ
- Model: 1500/1600
- Year: High Windshield-68-70
Re: SU SIDE DRAFT CARBS, TUNE UPS
Thanks for the information, I'll check them out. So far, I've spoken with about a dozen shops and only one works on them, unfortunately he has a waiting list and isn't taking on new customers until September. Thx Keith
- Nissanman
- Roadster Fanatic-Site Supporter
- Posts: 3452
- Joined: Mon Apr 16, 2007 8:07 pm
- Location: Adelaide, South Australia
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: SU SIDE DRAFT CARBS, TUNE UPS
Have look in the tech wiki site. There is some very useful info there and it is not beyond the average enthusiast to do the work on the carbs.
There is not much to go wrong: most carbs just need a good clean and adjustment check to perform well.
There is not much to go wrong: most carbs just need a good clean and adjustment check to perform well.
Nissanman, just trying to help.
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
-
- Roadster Nut
- Posts: 46
- Joined: Sat May 23, 2020 8:46 am
- Location: Houston
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: SU SIDE DRAFT CARBS, TUNE UPS
If not already done, I would send the carbs to a rebuilder to have the shafts redone. These carbs are way too old not to have problems. If these are not right, lots of chasing your tail.
-
- Roadster Newby
- Posts: 9
- Joined: Tue May 23, 2023 12:24 pm
- Location: PEORIA AZ
- Model: 1500/1600
- Year: High Windshield-68-70
Re: SU SIDE DRAFT CARBS, TUNE UPS
The carbs were rebuilt 1 year ago, I believe the fuel mix is to lean and needs adjustment and make sure the carbs are balanced and synced. In essence a fine tune. Just trying to find someone the is an expert at it. thx Keith