When doing a clutch job, traditional engine stands don’t work, because all want to bolt up to flywheel side.
So I built my own starting with a Harbor Fright castered dolly, sitting the engine on 2x6’s which line up with oil pan bolt pattern.
Makes it very easy to move around the garage, and onto a tarp for the Simple Green scrub activity.
And, these Dolly’s happen to be on sale this weekend for 9.99.
Oops, picture too large.
Note: for anyone local, I am done with mine, you can have it (but no shipping, that would be more than it is worth)
DIY engine stand
Moderators: notoptoy, S Allen, Solex68
-
FergO2k
- Roadster Fanatic-Site Supporter
- Posts: 1773
- Joined: Thu Apr 29, 2004 12:18 pm
- Location: SoCal
DIY engine stand
You do not have the required permissions to view the files attached to this post.
Fergus O
69 2L, SUs (driver, not susceptible to polish)
02 Tacoma 4 door (sold at 300k miles!)
2017 Honda Ridgeline (2021 purchase)
Los Alamitos, CA
69 2L, SUs (driver, not susceptible to polish)
02 Tacoma 4 door (sold at 300k miles!)
2017 Honda Ridgeline (2021 purchase)
Los Alamitos, CA