’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

jhayden · Post by **jhayden** » Thu Jul 27, 2023 2:23 pm

This is an EXACT replacement for your broken/missing original. Simply snap the new replacement (US made, not Chinese) in place in your original cover and install on your fuse box.

How do you get one? For a minimum gift of $10 to this ministry – er, website – yours will be mailed to the address you pm me. You MUST respond by posting “PM Sent” here, and only one per registered member. You are on your own (honor system) in terms of making your gift to this website by check or money order (Steve no longer has a PayPal account). You may even wait until after you have received the pin from me before contributing.
Here's how to get Steve's mailing address: viewtopic.php?t=37336

The purpose here is twofold: to increase participation in funding the continued operation of 311s.org, and to provide a replacement part for owners who wish to preserve both original function and appearance. There are numerous other fixes that most of us have tried for this problem. Please start a separate thread rather than offering any such solution here.

Thank you!
Jon
SRL311 08153
SRL311 13270 LT1 swap (https://www.ls1lt1.com/showcase/datsun- ... r-lt1.582/)

The first photo shows the two pieces you will receive from me to the right of a broken assembly. Putting a light film of dielectric on the prongs of the ring helps to snap it into place w/o damage as shown in the second photo. Also putting a light film on the outer post of the pin helps to snap it into place shown in the third photo. Now, pull back on the pin until it snaps back (just as it did in 1969), and reinstall on your fuse box!

drieseck · Post by **drieseck** » Thu Jul 27, 2023 3:02 pm

PM sent, thanks Jon.

drieseck · Post by **drieseck** » Tue Aug 08, 2023 10:57 am

Received mine today, exceptional part! Please don't miss this opportunity. Thanks Jon.

BAMUZ · Post by **BAMUZ** » Fri Sep 29, 2023 9:33 pm

jhayden wrote: Thu Jul 27, 2023 2:23 pm This is an EXACT replacement for your broken/missing original. Simply snap the new replacement (US made, not Chinese) in place in your original cover and install on your fuse box.

How do you get one? For a minimum gift of $10 to this ministry – er, website – yours will be mailed to the address you pm me. You MUST respond by posting “PM Sent” here, and only one per registered member. You are on your own (honor system) in terms of making your gift to this website by check or money order (Steve no longer has a PayPal account). You may even wait until after you have received the pin from me before contributing.
Here's how to get Steve's mailing address: viewtopic.php?t=37336

The purpose here is twofold: to increase participation in funding the continued operation of 311s.org, and to provide a replacement part for owners who wish to preserve both original function and appearance. There are numerous other fixes that most of us have tried for this problem. Please start a separate thread rather than offering any such solution here.

Thank you!
Jon
SRL311 08153
SRL311 13270 LT1 swap (https://www.ls1lt1.com/showcase/datsun- ... r-lt1.582/)

The first photo shows the two pieces you will receive from me to the right of a broken assembly. Putting a light film of dielectric on the prongs of the ring helps to snap it into place w/o damage as shown in the second photo. Also putting a light film on the outer post of the pin helps to snap it into place shown in the third photo. Now, pull back on the pin until it snaps back (just as it did in 1969), and reinstall on your fuse box!

This sounds awesome
Is this still, by chance, going on!?

jhayden · Post by **jhayden** » Sat Sep 30, 2023 10:53 am

Sure! Just PM me your mailing address as Dave did, mention "PM sent" here and yours will be mailed immediately.

Jon

BAMUZ · Post by **BAMUZ** » Sun Oct 01, 2023 8:23 am

jhayden wrote: Sat Sep 30, 2023 10:53 am Sure! Just PM me your mailing address as Dave did, mention "PM sent" here and yours will be mailed immediately.

Jon

PM sent
You’re awesome man!

William · Post by **William** » Fri Oct 27, 2023 3:26 pm

Pm sent!

William

Post by **S Allen** » Fri Dec 22, 2023 10:32 am

Thanks' for doing this Jon. Much appreciated.

Steve

roysuecan · Post by **roysuecan** » Fri Dec 22, 2023 6:03 pm

PM sent
Thank You

jhayden · Post by **jhayden** » Fri Dec 22, 2023 8:01 pm

Holiday greetings, all!

S Allen wrote: Fri Dec 22, 2023 10:32 am Thanks' for doing this Jon. Much appreciated.

Steve

Thank you, Steve, for another great year of dedicated service to roadster owners and followers. I'm happy to do this small bit -- hope it helps.

Btw to anyone reading this: OFFER STILL OPEN !!

Jon

halvernaz · Post by **halvernaz** » Fri Dec 22, 2023 8:35 pm

PM sent

Thanks

Datsun Roadster Forum-311s.org

’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

Re: ’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

Re: ’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

Re: ’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

Re: ’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

Re: ’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

Re: ’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

Re: ’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

Re: ’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

Re: ’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring

Re: ’69-’70 SRL/SPL (also early 510) Fuse Box Cover Retaining Pin with Locking Ring