Will test it on the distributor tester in the next weeks if I can find some time.
Distributor base plate
Moderators: notoptoy, S Allen, Solex68
-
richard
- Roadster Fanatic-Site Supporter
- Posts: 554
- Joined: Fri Oct 10, 2008 11:03 am
- Location: Hoorn, The Netherlands
- Contact:
Distributor base plate
Had made some new distributor base plates since they all wear out on the 3 spots were the bigger ball bearing is turning as you can see on the old plate. The new plate with 6 new ball bearings, 3 small ones and 3 bigger ones, is now turning smooth without hesitation.
Will test it on the distributor tester in the next weeks if I can find some time.
Will test it on the distributor tester in the next weeks if I can find some time.
Last edited by richard on Sun Oct 08, 2023 4:29 am, edited 1 time in total.
-
Nissanman
- Roadster Fanatic-Site Supporter
- Posts: 3364
- Joined: Mon Apr 16, 2007 8:07 pm
- Location: Adelaide, South Australia
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: Distributor base plate
Well done!
The vacuum advance will kick in nicely without a problem.
The vacuum advance will kick in nicely without a problem.
Nissanman, just trying to help.
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!