ARP flywheel bolt torque R16

[Habitat.pat]

I have ARP flywheel bolts on my R16 but don’t know what torque they should be tightened to. Anyone know if I should use the OEM 35 ft. lbs. or should it be higher? I was working off a posted torque listing but after torquing them to 58 noticed that the listing was for a U20. Just checking before I make any changes.

Peace, Pat

[Bwk2000]

Pat. I believe the R16 range is 35-44 ft.lbs for the OEM bolts.
From what I understand, ARP bolts require a higher torque (it should have been written right on the package they came in).

At any rate, the chart below should help:

BD27530A-2ADC-4F52-BB50-C85FDB467D02.jpeg

[Bwk2000]

Since it looks like the flywheel to crank shaft bolts are 3/8” from the table below. I would say 45 ft.lbs should do the trick.

75CA50CF-E6AE-41CC-8B4A-B5AEEF882C19.png

[23yrRebuild]

True Dat...
https://arpinstructions.com/generaltorque.html