Does anyone know how to find out the manufacture or who might know who the made the hard top of this 67 I just bought..need some small parts. Included some pics
Thanks Andrew
You do not have the required permissions to view the files attached to this post.
Hey Andrew, welcome to the forum.
You can pretty much be assured that the OEM for that hardtop, if in business, no longer supports them.
Most are long gone.
That being said, it is a common one. There should be a metallic badge on inside right behind back edge of the driver or pass window opening.
looks like DynaPlastics to me. Their label had a Cinderella-esque horse drawn carriage on it, but label was on the outside.
So, parts. Rubber seals can be bought by the foot at local hot rod swap meets. Clamps transfer from your soft top frame, though some have driven with only rear clamps (eye-bolt like things sticking up thru th holes in the cockpit surround on both sides.
Fergus O
69 2L, SUs (driver, not susceptible to polish)
02 Tacoma 4 door (sold at 300k miles!)
2017 Honda Ridgeline (2021 purchase)
Los Alamitos, CA
Thanks for the info..I figured as much but I'm probably digging for air. I will probably have to improvise something or make it. The top itself is in great shape..the fiberglass portholes are all fractured looking from UV and temp cycles. Again great info thank you
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!