Looking for these needle bearings?

[Greaser2]

I have a 67 411 SSS manual. The trans is basically the roadster 4 speed shorted 4 inches mostly in the tail. I’ve disassembled the trans and have found all the ball and needle bearings I need accept these. There looks to be 3 sets under the 1-3 gears, two rows of about 54 needles per. Any ideas where I can find these?

CCC11E0D-8D46-42DD-9A9E-5FBF1D026670.jpeg

[redroadster]

IBT in Merriam KS . Also one in the KC west bottoms , is worth a try, there catalog is big , is the shaft good ?

[Bwk2000]

… Any ideas where I can find these?

If Don’s lead above doesn't pan out, you might want to try giving these guys a call (I believe yours is the F4W63 transmission):

https://www.drivetrain.com/parts-catalo ... sion-parts

[Greaser2]

Shaft looks fine, the trans was making plenty of groans so just replacing all bearings. Pic of trans, not exactly like a F4W63

D8093449-0E1B-4DB9-B181-CF4B3B3F4D69.jpeg

[Bwk2000]

Shaft looks fine, the trans was making plenty of groans so just replacing all bearings. Pic of trans, not exactly like a F4W63

Been a long time since I worked on one of those, but it sure looks like a F4W63 (maybe for a J16 engine) What do you have under the hood?

[Greaser2]

It’s an R16 engine.

[Greaser2]

9D51D6AE-946B-45C1-89A6-F18A0137213B.jpeg

Is the counter gear shaft supposed to have this groove. Not sure how it would have worn away if not designed this way.

[Bwk2000]

Wow. That’s the worst scoring I’ve seen. Probably from a seized (or wrong sized) needle bearing somewhere in it’s 50+ year history.