Anyone ever see the bumper rubber melt?
Moderators: notoptoy, S Allen, Solex68
-
- Roadster Nut
- Posts: 43
- Joined: Sat Aug 27, 2022 11:46 am
- Location: MD
- Model: 1500/1600
- Year: High Windshield-68-70
Anyone ever see the bumper rubber melt?
What kind of rubber/urethane is this? Lol.
You do not have the required permissions to view the files attached to this post.
- Bwk2000
- Roadsteraholic
- Posts: 982
- Joined: Mon Aug 23, 2021 3:09 pm
- Location: Halifax, Nova Scotia
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Anyone ever see the bumper rubber melt?
Damn … Looks like that was made from tar, not rubber.
Kai
Halifax, N.S.
’69 SPL311 Sports 1600
Classic Cars - Because clean fingernails, free weekends, intact knuckles and financial stability are totally overrated.
Halifax, N.S.
’69 SPL311 Sports 1600
Classic Cars - Because clean fingernails, free weekends, intact knuckles and financial stability are totally overrated.
- Gregs672000
- Roadster Fanatic-Site Supporter
- Posts: 9428
- Joined: Fri Aug 07, 2009 11:47 pm
- Location: Tacoma, WA
Re: Anyone ever see the bumper rubber melt?
Whaaaat? I don't have them, but I've never seen that happen before. Where do you live, Death Valley?
Greg Burrows
'67 2000 #588
Tacoma, WA
'67 2000 #588
Tacoma, WA
-
- Roadster Nut
- Posts: 43
- Joined: Sat Aug 27, 2022 11:46 am
- Location: MD
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Anyone ever see the bumper rubber melt?
It was a mild 70s today. It came with the car… maybe it was cheap urethane. Iono now I got to clean it up…
I think it was the reflections or something.
I think it was the reflections or something.
- rwmann
- Roadster Fanatic-Site Supporter
- Posts: 769
- Joined: Wed Aug 20, 2008 6:11 am
- Location: Port Washington, NY
- Model: 2000
- Year: High Windshield-68-70
Re: Anyone ever see the bumper rubber melt?
Looks like a repair gone bad.
- tjp
- Site Supporter
- Posts: 2587
- Joined: Wed Aug 20, 2008 5:49 am
- Location: Midwest
- Model: 2000
- Year: High Windshield-68-70
Re: Anyone ever see the bumper rubber melt?
I've seen NOS tie rod and ball joint boots do that in the bag (never installed). I wonder if the bumper rubber is a similar thing?
My junk pile:
71 Jeep Gladiator. Restored w/#s matching engine. My WeeBeasty
70 1600 legit 2nd owner. Stroked and bored
Several salvaged w access to a barn full of parts, part cars & whole cars
......What's in the barn is for sale. What do you need?
71 Jeep Gladiator. Restored w/#s matching engine. My WeeBeasty
70 1600 legit 2nd owner. Stroked and bored
Several salvaged w access to a barn full of parts, part cars & whole cars
......What's in the barn is for sale. What do you need?
- redroadster
- Roadsteraholic
- Posts: 2624
- Joined: Tue Mar 12, 2013 10:58 am
- Location: KCMO
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Anyone ever see the bumper rubber melt?
There's several YT sites that follow the celestial mass ejections , the magnaspere keeps most of the particals off us , a few days ago The satellite image of this seemed to show the magnaspere fading , bet that the reason
I have seen the heater box pipe seal tacky almost goo
I have seen the heater box pipe seal tacky almost goo
Last edited by redroadster on Wed Oct 26, 2022 9:30 am, edited 1 time in total.
Datsun dealer tech 76 to 87
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
- Nissanman
- Roadster Fanatic-Site Supporter
- Posts: 3452
- Joined: Mon Apr 16, 2007 8:07 pm
- Location: Adelaide, South Australia
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: Anyone ever see the bumper rubber melt?
Nah! Stray gamma ray is what did it



Nissanman, just trying to help.
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
-
- Roadster Nut
- Posts: 43
- Joined: Sat Aug 27, 2022 11:46 am
- Location: MD
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Anyone ever see the bumper rubber melt?
Was it aliens?!?
- jrusso07
- Roadsteraholic
- Posts: 1766
- Joined: Sat Aug 02, 2008 9:02 am
- Location: Penn Yan, NY
- Model: 2000
- Year: High Windshield-68-70
Re: Anyone ever see the bumper rubber melt?
Never seen this before. I would guess it's a combination of age, heat and some solvent like ammonia or gasoline. Looks to be only on the leading edge so maybe you drove through a puddle of gas and splashed up onto the rubber?
Joe
1969 SRL311 - Solex
1970 SPL311 - U20 mod
1970 SRL311
1969 SRL311 - Solex
1970 SPL311 - U20 mod
1970 SRL311
-
- Roadster Nut
- Posts: 43
- Joined: Sat Aug 27, 2022 11:46 am
- Location: MD
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Anyone ever see the bumper rubber melt?
Probably so. I took it off both sides and cleaned all the mess up. I'm contemplating if I should replace them and wondering if it'll happen again.
There is a hole now that I have a poor fitting rubber grommet in there for now.
There is a hole now that I have a poor fitting rubber grommet in there for now.
-
- Roadster Fanatic-Site Supporter
- Posts: 330
- Joined: Fri Jun 28, 2019 1:29 pm
- Location: Loreto B.C.S. Mexico
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Anyone ever see the bumper rubber melt?
Any possibility that the exhaust is somehow heating up that side of the bumper? Is it just the one side melting or both? Seems like a long shot but .....
Ive seen normal. It aint pretty.
-
- Roadster Nut
- Posts: 43
- Joined: Sat Aug 27, 2022 11:46 am
- Location: MD
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Anyone ever see the bumper rubber melt?
I thought at first but the bumper was cool.
- Bwk2000
- Roadsteraholic
- Posts: 982
- Joined: Mon Aug 23, 2021 3:09 pm
- Location: Halifax, Nova Scotia
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Anyone ever see the bumper rubber melt?
Funny you should mention that Tim. Someone here is selling New Old Stock Datsun ball joints that have been sitting in the original wrapper and box for 40+ years. What the hell were these things made of back then?tjp wrote: Sun Oct 16, 2022 8:12 am I've seen NOS tie rod and ball joint boots do that in the bag (never installed) …
You do not have the required permissions to view the files attached to this post.
Kai
Halifax, N.S.
’69 SPL311 Sports 1600
Classic Cars - Because clean fingernails, free weekends, intact knuckles and financial stability are totally overrated.
Halifax, N.S.
’69 SPL311 Sports 1600
Classic Cars - Because clean fingernails, free weekends, intact knuckles and financial stability are totally overrated.
- redroadster
- Roadsteraholic
- Posts: 2624
- Joined: Tue Mar 12, 2013 10:58 am
- Location: KCMO
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Anyone ever see the bumper rubber melt?
Looks so much like black RTV, like it's supple & got oil in it
your not kidding right ?
And the BJ Pic...oil eats rubber slowly
Nissan 3" rubber tubes to the air filter , turbo rubber tubes were tough to R&R , one tech started greasing them slightly Instead of using brake clean .... they went soft 18 months later and we had to fix
your not kidding right ?
And the BJ Pic...oil eats rubber slowly
Nissan 3" rubber tubes to the air filter , turbo rubber tubes were tough to R&R , one tech started greasing them slightly Instead of using brake clean .... they went soft 18 months later and we had to fix
Datsun dealer tech 76 to 87
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster