I have a mishmash of locks that I have kept over the years.
Does the smaller diameter opening vs. the larger mean high vs. low locks?
x
If you swap the #4 piece, can you use a door lock in a trunk?
I do notice that #2 is shorter in the trunk lock and that #3 extends from end-to-end in the trunk lock, but they seem to be in the same position.
A couple of lock questions
Moderators: notoptoy, S Allen, Solex68
- steve_car
- Roadster Fanatic
- Posts: 442
- Joined: Thu Feb 23, 2006 11:01 pm
- Location: Auburn, WA
A couple of lock questions
You do not have the required permissions to view the files attached to this post.
Last edited by steve_car on Fri Aug 12, 2022 1:49 pm, edited 1 time in total.
Steve
65 1500
62 L320
65 1500
62 L320
- Habitat.pat
- Roadsteraholic
- Posts: 666
- Joined: Thu Jul 07, 2016 8:29 pm
- Location: Central Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: A couple of lock questions
My 67.5 has the smaller openings like the bottom lock.
Peace,
Pat
Peace,
Pat
67.5 SPL311 Stroker Restomod
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
- steve_car
- Roadster Fanatic
- Posts: 442
- Joined: Thu Feb 23, 2006 11:01 pm
- Location: Auburn, WA
Re: A couple of lock questions
Thanks Pat, so the satin locks must be 67.5-70.
I just tried a door lock in the trunk and it doesn't go in the hole because of the long projection #3. I did not want to distort the hole to find out any more.
I just tried a door lock in the trunk and it doesn't go in the hole because of the long projection #3. I did not want to distort the hole to find out any more.
Steve
65 1500
62 L320
65 1500
62 L320