Upper a arm bushing and spindle

[sevenmilebridge]

OK this may be a silly question but I have the upper a arm off and need to replace the bushing.... no problem however I need to put new replace the dust covers so how do you get the spindle out of the a arm? I have the bushings off but there is not enough room to get the spindle off the a arm very puzzling. Looks like you would have to bend the a arm to get the spindle out.

[Bwk2000]

If you already have both the hex bushing nuts off, then just pull it down really hard against the boot. It takes a little prying but it will come out. It’s a very tight fit!

[Egz]

Tight fit indeed. It feels like one of those metal puzzles where it looks impossible to fit the key through the opening, but then brute force just solves it.