Mechanic in LA area

[RichardA]

Can anyone recommend any good mechanics in Los Angeles area to repair horn and blinker?

Thanks!
Richard

[Gregs672000]

Richard, did you ever get this issue resolved?

[garcia_vm]

I'm looking to rebuild my 1600, anyone know of a good shop to take it to?

[Bwk2000]

I'm looking to rebuild my 1600, anyone know of a good shop to take it to?

No personal experience with them, but the rebuilds they post appear to be of very high quality - Might be worth checking out.

https://losangelesmachineshop.com/nissa ... e-rebuild/

[raylim]

I've not had the best experience with Los Angeles Machine shop (Sun Valley) the 1600 had to go back after a full rebuild with all new parts to have had a bad valve guide. I won't get back those 3 hours from the R&R of the engine. Thomas had his U20 done and it ended up with a scored cylinder wall and the only remedy is to get a used U20 put in. My $.02

[Bwk2000]

I've not had the best experience with Los Angeles Machine shop (Sun Valley) the 1600 had to go back after a full rebuild with all new parts to have had a bad valve guide. I won't get back those 3 hours from the R&R of the engine. Thomas had his U20 done and it ended up with a scored cylinder wall and the only remedy is to get a used U20 put in. My $.02

I would always take the recommendation of first hand experience any day. Goes to show, selective happy customer posts are not the whole story - Thanks for the insight Ray

[garcia_vm]

thanks for your input, I'll look into it.

[raylim]

thanks for your input, I'll look into it.

Pm me when you get a chance and we can talk about what your car may need. I'm in the Pasadena Area so not too far from you.
Ray