Help identifying rubber piece on clutch fork

[kennyele11]

The rubber piece on the left seems to be cracked. I looked up datsun roadster clutch fork but the products displayed don’t have the circular shape like mine does. I have a 1968 1600. Thanks In advance!

[kennyele11]

The photo seems to have flipped after I uploaded it, it’s the rubber boot on the right now

[DAC21]

https://www.datsunparts.com/Transmission-5-Speed

Part No. 1482 in all likelihood since you have a 5 speed. That is if you are after the clutch fork boot.

I believe Dean has a min. $29 order. If you don't need anything else, here is an eBay listing

https://www.ebay.com/itm/154802583272

[Bwk2000]

Also missing your clutch slave spring (unless you removed it prior to the picture).

[kennyele11]

https://www.datsunparts.com/Transmission-5-Speed

Part No. 1482 in all likelihood since you have a 5 speed. That is if you are after the clutch fork boot.

I believe Dean has a min. $29 order. If you don't need anything else, here is an eBay listing

https://www.ebay.com/itm/154802583272

I actually have a 4 speed

[spl310]

https://www.datsunparts.com/2191

[DAC21]

https://www.datsunparts.com/Transmission-5-Speed

Part No. 1482 in all likelihood since you have a 5 speed. That is if you are after the clutch fork boot.

I believe Dean has a min. $29 order. If you don't need anything else, here is an eBay listing

https://www.ebay.com/itm/154802583272

I actually have a 4 speed

More than one Roadster? If not you might want to update your profile as currently it is showing as a high windshield 2000.

[kennyele11]

https://www.datsunparts.com/Transmission-5-Speed

Part No. 1482 in all likelihood since you have a 5 speed. That is if you are after the clutch fork boot.

I believe Dean has a min. $29 order. If you don't need anything else, here is an eBay listing

https://www.ebay.com/itm/154802583272

I actually have a 4 speed

More than one Roadster? If not you might want to update your profile as currently it is showing as a high windshield 2000.

Wasn’t entirely sure what I had when I got it but I later found out the engine was swapped to a u20 but it still has the 4 speed transmission. I’m also getting grinding when I down shift. I tried making the adjustment at the fork and changed gear oil but that didn’t seem to help. What’s next? Transmission rebuild?

[spl310]

Yes, your synchronizer is likely tired.

[kennyele11]

Anybody rebuild transmissions in Northern California? Not entirely sure if I’d be able to do it myself.

[Nissanman]

Might be more economical and definitely more desirable to upgrade to a later model Nissan 5 speed to suit
I'm doing just that to my '65 SP310

[kennyele11]

Might be more economical and definitely more desirable to upgrade to a later model Nissan 5 speed to suit
I'm doing just that to my '65 SP310

If you’re following a guide or have any resources I’d love to see them!

[Nissanman]

I started a thread on this site: -
"Transmission conversion 4 speed to 5 speed FS5W71B".
https://311s.org/phpBB3/viewtopic.php?p=325195#p325195
and have documented progress on my Shutterfly Album site: -
https://nissanman.shutterfly.com/3051

ATM I have my flywheel and new clutch cover/pressure plate in a shop.
The clutch cover is a modern diaphragm unit and has a different mounting PCD to the original clutch, so 6 new holes for the fasteners and 3 for the locating dowels.
Should be just about done this week