Any thoughts if this Ignition Sw. will work.. 1967

[DAC21]

Saw this on eBay. NOS for various 1960's Datsuns. It comes with 4000/8000 series keys which is what I have on my 1967. I know one Roadster vendor sells a couple Nissan but non Roadster ignition alternatives that will work on early Roadsters although the neck / barrel is a smaller diameter, 13/16 versus the correct 1" for Roadsters. This switch at the link has 4 terminals, our Roadsters have 3. But the wiring diagram shows no use for terminal #4 so maybe there is hope?? I guess unless someone on the board has actually tried this part there is no knowing if it will work, just thought I'd ask.

Thanks

https://www.ebay.com/itm/294354447512?c ... HzEALw_wcB

[devo]

Curtis bought a Ron Francis ignition switch a few years back that looked and functioned like original, IIRC. Maybe he will chime in.

[unklpat]

All I can say is beware 1968 anything. Pat

[Curtis]

Yes, I bought a Ron Francis IS-02 which has extra pins you don't have to use. Works really well and unless you know what the original nut looks like you can't even tell. I can't believe the things you guys remember.

[DAC21]

Yes, I bought a Ron Francis IS-02 which has extra pins you don't have to use. Works really well and unless you know what the original nut looks like you can't even tell. I can't believe the things you guys remember.

Curtis can you use your OEM key lock core (thinking not) or can the core that comes with IS-02 from Ron Frances be rekeyed to your original Roadster Key?

Thanks