What gauges used for your SR20det swap?

Discuss engine swap details here!

Moderators: notoptoy, S Allen, Solex68

Post Reply
eye
Roadster Fanatic
Posts: 290
Joined: Tue Nov 07, 2017 5:44 pm
Location: NC
Model: 2000
Year: High Windshield-68-70

What gauges used for your SR20det swap?

Post by eye »

Building a dash from scratch and wondered what everyone used with their sr2odet swaps?

Probably getting a wiring specialties harness to start with.

Tks
projects at 329art instagram
more junk 329art.com
Top
User avatar
dynaguy
Roadster Fanatic-Site Supporter
Posts: 1250
Joined: Wed Jan 01, 2003 3:27 pm
Location: Colton, Wa

Re: What gauges used for your SR20det swap?

Post by dynaguy »

I used Classic instruments Hot Rod series in my '66 flat dash I swapped in my '69 sr20de car. Have to enlarge the speedo and tach holes a little. Used an original clock. Used Classic Instruments wiring harness for the gauges. Wiring Specialties for engine/electronics. EZ wiring 20 circuit for body, lights, radio, wipers etc. Pat

viewtopic.php?f=27&t=17915
Top
User avatar
TurboRagtop
Roadster Nut-Site Supporter
Posts: 317
Joined: Tue Sep 06, 2005 8:15 pm
Location: Gilbert, AZ
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: What gauges used for your SR20det swap?

Post by TurboRagtop »

I also used Classic Instruments Hot Rod series gauges in my 1966 1600, although not an SR20 swap. Used Classic Instruments sub harness for the gauges, EZ wiring harness for the chassis.
Karl Payne, Gilbert, AZ
1966 1600 roadster, 2.3L EFI Turbo Ford engine, FMIC, 2.5" exhaust, T-5 trans, 300ZX big brakes, stand-alone Megasquirt ECU/TunerStudio
Top
eye
Roadster Fanatic
Posts: 290
Joined: Tue Nov 07, 2017 5:44 pm
Location: NC
Model: 2000
Year: High Windshield-68-70

Re: What gauges used for your SR20det swap?

Post by eye »

Great job guys. Thanks
Looking forward to getting the rust bucket on the road by summer!
projects at 329art instagram
more junk 329art.com
Top
D P
Roadster Fanatic
Posts: 107
Joined: Mon Jun 13, 2016 4:34 pm
Location: Vancouver, BC
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: What gauges used for your SR20det swap?

Post by D P »

Auto meter sport comps. Can’t find a photo with the speedo. Had to open up the speedo and tach holes slightly. They fit well in the other existing holes with angle rings.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
spriso
Vendor
Posts: 1629
Joined: Wed Jun 04, 2003 9:20 am
Location: Oregon
Contact:
Contact spriso

Re: What gauges used for your SR20det swap?

Post by spriso »

Here is an old thread on a gauge converison that I did on a local SR20 powered roadster:

viewtopic.php?f=2&t=7947

Michael
Spriso Motorsports
http://www.spriso.com
Instagram https://instagram.com/spriso/
SR20 Powered Roadsters
Engine swap kits Available! See my website!
Top
User avatar
RCMike
Roadsteraholic
Posts: 2460
Joined: Tue Mar 13, 2012 12:58 pm
Location: Pomona, CA

Re: What gauges used for your SR20det swap?

Post by RCMike »

My new ones are not in the car yet. But they are ready..

I went stock, built by Globaltech, modified to work with my engine..
Screenshot_20191002-223050_Gallery.jpg
.
Screenshot_20191002-223116_Gallery.jpg
.
Screenshot_20191002-223446_Gallery.jpg
.
Screenshot_20191002-223525_Gallery.jpg
.
Screenshot_20191002-223538_Gallery.jpg
.
Screenshot_20191002-223620_Gallery.jpg
You do not have the required permissions to view the files attached to this post.
Top
SABLT194
Roadster Fanatic
Posts: 257
Joined: Wed Jul 14, 2010 3:55 pm
Location: Gardners, PA

Re: What gauges used for your SR20det swap?

Post by SABLT194 »

Classic Instruments in the dash- Speed Hut WB-O2 and Boost gage in the console
You do not have the required permissions to view the files attached to this post.
1966 1600 SR20 DET Restomod
1969 Ford Thunderchicken 429 BBF Suicide Door Car
1994 Pontiac Formula - 355 M6 435 RWHP 11.54 @ 125 MPH
1971 Dodge Dart - Next Resto Mod Project Gen 3 392 Hemi with T56
2017 Ram 1500 Daily Driver
Top
EMH
Forum Newb
Posts: 3
Joined: Fri Oct 08, 2021 8:48 pm
Location: Australia QLD
Model: 2000
Year: High Windshield-68-70

Re: What gauges used for your SR20det swap?

Post by EMH »

RCMike wrote: Thu Oct 03, 2019 12:38 am My new ones are not in the car yet. But they are ready..

I went stock, built by Globaltech
They look amazing! Pure class. Can you give a link or more info to the company who made them? My google search just shows up a bunch of other companies that have the same name.
Can you give any info on the work they did? Are they compatible with any modern ecu?
Top
onsight512
Site Supporter
Posts: 308
Joined: Fri Mar 02, 2018 9:39 pm
Location: in the Verdugos
Model: 1500/1600
Year: High Windshield-68-70

Re: What gauges used for your SR20det swap?

Post by onsight512 »

I dropped my stock gauges off with Global Tech/Jon Frampton also. I have an sr20de and am getting started on a VVL build. Jon is going to up the redline on the tach to match the VVL. I can't wait.

RCMike wrote: Thu Oct 03, 2019 12:38 am My new ones are not in the car yet. But they are ready..

I went stock, built by Globaltech, modified to work with my engine..

Screenshot_20191002-223050_Gallery.jpg

.

Screenshot_20191002-223116_Gallery.jpg

.

Screenshot_20191002-223446_Gallery.jpg

.

Screenshot_20191002-223525_Gallery.jpg

.

Screenshot_20191002-223538_Gallery.jpg

.

Screenshot_20191002-223620_Gallery.jpg
Top
onsight512
Site Supporter
Posts: 308
Joined: Fri Mar 02, 2018 9:39 pm
Location: in the Verdugos
Model: 1500/1600
Year: High Windshield-68-70

Re: What gauges used for your SR20det swap?

Post by onsight512 »

Global Tech Instruments, Inc.
18380 Enterprise Lane
Huntington Beach, Ca 92648

714-375-1811
800-563-5388

jframpton@globaltechinstruments.com


EMH wrote: Tue Oct 12, 2021 5:04 pm
RCMike wrote: Thu Oct 03, 2019 12:38 am My new ones are not in the car yet. But they are ready..

I went stock, built by Globaltech
They look amazing! Pure class. Can you give a link or more info to the company who made them? My google search just shows up a bunch of other companies that have the same name.
Can you give any info on the work they did? Are they compatible with any modern ecu?
Top
Post Reply

Return to “Engine Swaps”